HP StorageWorks NAS b2000 v2 Quick Start Manual page 38

Plankton_book.book Page 38 Monday, February 3, 2003 4:06 PM
Configuration Setup
38
All manuals and user guides at all-guides.com
3. Go to the NAS device and power it on. It will be several minutes before the
NAS device is accessible on the network.
4. Open Internet Explorer on the Windows-based PC. Enter
number of the NAS b2000 v2 followed by a hyphen (
Press Enter. This launches the WebUI configuration application (Rapid
Startup) on the target HP StorageWorks NAS device as shown in
Example:
http://D4059ABC3433-:3201
Note: The NAS device will respond when the NAS operating system has started.
5. Using the information from
your information is correct when the configuration review screen is displayed,
as shown in Figure
6. Click the Finish icon to exit Rapid Startup. Close the browser window. The
NAS b2000 v2 will now reboot to set the configuration information.
Table 4, fill in the screens that follow. Verify that
9.
, the serial
http://
), followed by
- :3201
Figure
NAS b2000 v2 Quick Start Guide
.
8.