HP StorageWorks NAS b2000 v2 Quick Start Manual page 27

Plankton_book.book Page 27 Monday, February 3, 2003 4:06 PM
NAS b2000 v2 Quick Start Guide
All manuals and user guides at all-guides.com
Table 3: Configuration Information
Part A: To be completed for DHCP and non-DHCP configurations
Server Host Name:
Integrated Lights-Out Name:
Note: If NIC teaming is to be implemented, determine which ports will be teamed.
Configure these Ethernet ports for DHCP protocol. For more information, refer to the
Ethernet teaming features and procedures section of administrative procedures in the
administration guide.
Part B: To be completed for non-DHCP configurations only
DNS Servers
1
2
3
NAS NIC Port*
Eth 0
Eth 1
Integrated Lights-Out Eth port
* The default NAS b2000 v2 has two Ethernet ports available for network
connectivity. Disable ports that will not be used. Each Ethernet port must be
configured with a separate subnet.
Part C: SNMP Information (optional)
Trap Destination (IP Address)
Manager Client:
Management Traps Community
String:
System Management
Community String:
Integrated Integrated Lights-Out Password:
Lights-Out
Default User:
IP Address
IP Address Subnet Mask
Before You Begin
Gateway
Address
27