ST STM3241G-EVAL User Manual
  1. Manuals
  2. Brands
  3. ST Manuals
  4. Motherboard
  5. STM3241G-EVAL
  6. User manual
ST STM3241G-EVAL User Manual

ST STM3241G-EVAL User Manual

Hide thumbs Also See for STM3241G-EVAL:
Table of Contents

Advertisement

Quick Links

Download this manual
All manuals and user guides at all-guides.com
UM1460
User manual
STM3241G-EVAL evaluation board
Introduction
The STM3241G-EVAL evaluation board is a complete demonstration and development
platform for the STM32F4 Series and includes an embedded STM32F417IGH6 high-
®
®
performance ARM
Cortex
-M4F 32-bit microcontroller.
The full range of hardware features provided on the board is described to evaluate all
peripherals (USB-OTG HS, USB-OTG FS, Ethernet, motor control, CAN, microSD™ card,
smartcard, USART, Audio DAC, RS-232, IrDA up to version C07 of the board, SRAM,
ST MEMS, EEPROM etc.) before developing applications. Extension headers are used to
easily connect a daughterboard or a wrapping board for any specific application.
The in-circuit ST-LINK/V2 tool provides easy JTAG and SWD interface debugging and
programming.
Figure 1. STM3241G-EVAL evaluation board
1. Picture is not contractual
October 2016
DocID022136 Rev 5
1/67
1
www.st.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the STM3241G-EVAL and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ST STM3241G-EVAL

Summary of Contents for ST STM3241G-EVAL

  • Page 1 (USB-OTG HS, USB-OTG FS, Ethernet, motor control, CAN, microSD™ card, smartcard, USART, Audio DAC, RS-232, IrDA up to version C07 of the board, SRAM, ST MEMS, EEPROM etc.) before developing applications. Extension headers are used to easily connect a daughterboard or a wrapping board for any specific application.

  • Page 2: Table Of Contents

    ST MEMS ........
  • Page 3 STM3241G-EVAL pinout ........38...
  • Page 4 STM3241G-EVAL pinout ........
  • Page 5 STM3241G-EVAL evaluation board layout ........

  • Page 6: Overview

    Demonstration software is preloaded in the board-mounted Flash memory for easy demonstration of the device peripherals in standalone mode. For more information and to download the latest version, please refer to STM3241G-EVAL demonstration software at the www.st.com/mcu website. Ordering information...

  • Page 7: Delivery Recommendations

    The plastic protection on the camera should be removed carefully as the connection is very fragile. Hardware layout and configuration The STM3241G-EVAL evaluation board is designed around the STM32F417IGH6 in a UFBGA176 package. The hardware block diagram illustrates the connections between the...
  • Page 8 All manuals and user guides at all-guides.com Hardware layout and configuration UM1460 Figure 2. Hardware layout and configuration 8/67 DocID022136 Rev 5...
  • Page 9 All manuals and user guides at all-guides.com UM1460 Hardware layout and configuration Figure 3. STM3241G-EVAL evaluation board layout DocID022136 Rev 5 9/67...

  • Page 10: Power Supply

    UM1460 Power supply The STM3241G-EVAL evaluation board is designed to be powered by 5 V DC power supply and to be protected by PolyZen from a wrong power plug-in event. It is possible to configure the evaluation board to use any of following five sources for the power supply: •...

  • Page 11: Boot Option

    To connect Vbat to 3.3V power, set JP19 as shown: (Default setting) Note: LED LD9 is lit when the STM3241G-EVAL evaluation board is powered by 5 V correctly. Boot option The STM3241G-EVAL evaluation board is able to boot from: •...

  • Page 12: Clock Source

    X4, 25 MHz crystal with socket for the STM32F417IGH6 microcontroller. It can be removed from socket when internal RC clock is used. Reset source The reset signal of STM3241G-EVAL evaluation board is low active. Reset sources include: • Reset button B1 •...

  • Page 13: Eeprom

    JP24 Default setting: Not fitted The STM3241G-EVAL evaluation board has two channels of CAN2.0A/B compliant CAN bus communication based on a 3.3 V CAN transceiver on the DB9 connector (CN10). The two CAN buses can be disconnected by jumpers from relevant STM32F417IGH6 I/Os which are shared with FSMC and USB-OTG HS.

  • Page 14: Rs-232 And Irda

    (CN16) and IrDA transceiver U11 which are connected to USART3 of the STM32F417IGH6 on the STM3241G-EVAL evaluation board. The IrDA transceiver (TFDU6300) is not populated on STM3241G-EVAL evaluation board from version C08. The version of the board is written on sticker placed on bottom side of the board (ex: MB786-C08).

  • Page 15: Motor Control

    Hardware layout and configuration Motor control The STM3241G-EVAL evaluation board enables a three-phase brushless motor control via a 34-pin connector (CN5), which provides all required control and feedback signals to and from the motor power-driving board. Available signals on this connector include emergency...

  • Page 16: Smartcard

    UM1460 2.10 Smartcard STMicroelectronics smartcard interface chip ST8024 is used on the STM3241G-EVAL board for asynchronous 3 V and 5 V smartcards. It performs all supply protection and control functions based on the connections with the STM32F417IGH6 listed in Table Table 9.

  • Page 17: St Mems

    UM1460 Hardware layout and configuration 2.12 ST MEMS The ST MEMS device LIS302DL is connected to the I2C1 bus of the STM32F417IGH6 on the board. 2.13 Potentiometer A 10 kΩ potentiometer RV1 is connected to PF9 of the STM32F417IGH6 on the board.

  • Page 18: Ethernet

    UM1460 2.16 Ethernet The STM3241G-EVAL evaluation board enables 10/100M Ethernet communication by a PHY DP83848CVV (U5) and integrated RJ45 connector (CN7). Both MII and RMII interface modes can be selected by setting jumpers JP5, JP6 and JP8 as listed in Table Table 12.

  • Page 19: Usb-Otg Hs

    The STM3241G-EVAL evaluation board enables USB-OTG HS communication via USB micro-AB connector (CN9), USB high-speed PHY (U8) and USB power switch (U4) connected to VBUS. The STM3241G-EVAL can be powered by CN9 at 5 V DC with a 500 mA current limitation.

  • Page 20: Sram

    Hardware layout and configuration UM1460 Figure 4. Pin 1 camera plug 1. Picture is not contractual The camera extension connector CN23 is available on the board to connect the ST camera plug-in board. 2.19 SRAM The 16 Mbit SRAM is connected to the FSMC bus of the STM32F417IGH6 which shares the same I/Os with the CAN1 bus.

  • Page 21: Development And Debug Support

    2.20 Development and debug support Version 2 of the ST-LINK, called ST-LINK/V2 is embedded on the board. This tool allows onboard program loading and debugging of the STM32F using the JTAG or SWD interface. Third-party debug tools are supported by the JTAG (CN14) or Trace (CN13) connectors To communicate with the embedded ST-LINK/V2, a specific driver needs to be installed on the PC.

  • Page 22: Display And Input Devices

    All manuals and user guides at all-guides.com Hardware layout and configuration UM1460 2.21 Display and input devices The 3.2” TFT color LCD connected to FSMC bus and 4 general purpose color LEDs (LD 1, 2, 3, 4) are available as display devices. A touchscreen connected to an I/O expander (U24), 4-direction joystick with selection key, general purpose button (B4), wakeup button (B2) and tamper detection button (B3) are available as input devices.

  • Page 23: Connectors

    Daughterboard extension connectors CN1, 2, 3 and 4 Four male headers, CN1, 2, 3 and 4, can be used to connect with a daughterboard or standard wrapping board to the STM3241G-EVAL evaluation board. A total number of 140 GPIOs are available on the board.

  • Page 24: Table 19. Daughterboard Extension Connector Cn2

    All manuals and user guides at all-guides.com Connectors UM1460 Table 18. Daughterboard extension connector CN1 (continued) How to disconnect with function block on Description Alternative function STM3241G-EVAL board Trace_CLK Trace_D1 & FSMC_A20 Keep JP1 on 2<->3 Trace_D3 PC13 Anti-Tamper Remove R143...
  • Page 25 All manuals and user guides at all-guides.com UM1460 Connectors Table 19. Daughterboard extension connector CN2 (continued) How to disconnect with function block on Description Alternative Function STM3241G-EVAL board ULPI_D1 BOOT1 PF12 FSMC_A6 PF14 FSMC_A8 FSMC_A11 FSMC_D5 PE10 FSMC_D7 PE12 FSMC_D9...

  • Page 26: Table 20. Daughterboard Extension Connector Cn3

    Connectors UM1460 Table 19. Daughterboard extension connector CN2 (continued) How to disconnect with function block on Description Alternative Function STM3241G-EVAL board Remove camera module from CN15. PH10 DCMI_D1 &MC Disconnect motor control board from CN5. Remove camera module from CN15.
  • Page 27 All manuals and user guides at all-guides.com UM1460 Connectors Table 20. Daughterboard extension connector CN3 (continued) How to disconnect with function block on Description Alternative Function STM3241G-EVAL board EMU_5V IO_Expandor_INT Remove R136 I2S_CMD Remove camera module from CN15. PH14 DCMI_D4 & MC Disconnect motor control board from CN5.

  • Page 28: Table 21. Daughterboard Extension Connector Cn4

    UM1460 Table 21. Daughterboard extension connector CN4 How to disconnect with function block on Description Alternative Function STM3241G-EVAL board Remove camera module from CN15. DCMI_D6 & MC Disconnect motor control board from CN5. Remove camera module from CN15. DCMI_D5 & MC SB16 open.
  • Page 29 All manuals and user guides at all-guides.com UM1460 Connectors Table 21. Daughterboard extension connector CN4 (continued) How to disconnect with function block on Description Alternative Function STM3241G-EVAL board PG14 MII_TXD1 Remove RS6 PG13 MII_TXD0 Remove RS6 PG11 MII_TX_EN Remove RS6...

  • Page 30: Motor Control Connector Cn5

    All manuals and user guides at all-guides.com Connectors UM1460 Motor control connector CN5 Figure 5. Motor control connector CN5 Table 22. Motor control connector CN5 STM32F417IGH STM32F417IGH Description number number Description 6 pin of CN5 of CN5 Emergency stop PWM-UH PWM-UL PH13 PWM-VH...

  • Page 31: Microsd Connector Cn6

    All manuals and user guides at all-guides.com UM1460 Connectors microSD connector CN6 Figure 6. microSD connector CN6 Table 23. microSD connector CN6 Pin number Description Pin number Description SDIO_D2 (PC10) SDIO_CLK (PC12) SDIO_D3 (PC11) Vss/GND SDIO_CMD (PD2) SDIO_D0 (PC8) +3V3 SDIO_D1 (PC9) microSDCard_detect (PH13) DocID022136 Rev 5...

  • Page 32: Ethernet Rj45 Connector Cn7

    All manuals and user guides at all-guides.com Connectors UM1460 Ethernet RJ45 connector CN7 Figure 7. Ethernet RJ45 connector CN7 Table 24. RJ45 connector CN7 Description Description number number TxData+ TxData- RxData+ Shield Shield RxData- Shield Shield USB-OTG FS Micro-AB connector CN8 Figure 8.

  • Page 33: Usb-Otg Hs Micro-Ab Connector Cn9

    Table 27. CAN D-type 9-pin male connector CN10 (CAN1 or CAN2) Pin number Description Pin number Description 1,4,8,9 CANH 3,5,6 CANL Audio connector CN11 A 3.5mm stereo audio jack CN11 is available on the STM3241G-EVAL board to support headset (headphone & microphone integrated). DocID022136 Rev 5 33/67...

  • Page 34: Trace Debug Connector Cn13

    All manuals and user guides at all-guides.com Connectors UM1460 Trace debug connector CN13 Figure 11. Trace debug connector CN13 Table 28. Trace debug connector CN13 Pin number Description Pin number Description 3.3 V power TMS/PA13 TCK/PA14 TDO/PB3 TDI/PA15 RESET# TraceCLK/PE2 TraceD0/PE3 or SWO/PB3 TraceD1/PE4 or nTRST/PB4 TraceD2/PE5...

  • Page 35: Camera Module Connector Cn15

    All manuals and user guides at all-guides.com UM1460 Connectors Table 29. JTAG debug connector CN14 (continued) Pin number Description Pin number Description RTCK RESET# DBGRQ DBGACK 3.11 Camera module connector CN15 Figure 13. Camera module connector CN15 Table 30. Camera module connector CN15 Pin number Description Pin number...

  • Page 36: Rs-232 Connector Cn16

    RS232_TX (PC10) Bootloader_RESET 3.13 Power connector CN18 The STM3241G-EVAL evaluation board can be powered from a 5 V DC power supply via external power supply jack (CN18) shown in 15. CN18 central pin must be positive. Figure Figure 15. Power supply connector CN18 3.14...

  • Page 37: Smartcard Connector Cn20

    Card presence detection pin Card presence detection pin 3.16 ST-LINK/V2 connector CN21 The USB type B connector CN21 can be used to connect the ST-LINK/V2 between the STM3241G-EVAL evaluation board and the PC for board debugging. DocID022136 Rev 5 37/67...

  • Page 38: Camera Extension Connector Cn23

    DCMI_D4 DCMI_D5 DCMI_D6 DCMI_D7 HSYSC VSYSC PIXCLK +2V8 +2V8 3.18 STM3241G-EVAL pinout Table 34. STM3241G-EVAL pinout Pin no. Pin name Description TRACE_CLK / FSMC_A23 TRACE_D0 / FSMC_A19 TRACE_D1 / FSMC_A20 TRACE_D2 / FSMC_A21 TRACE_D3 / FSMC_A22 VBAT VBAT PI8- ANTI TAMP2...
  • Page 39 All manuals and user guides at all-guides.com UM1460 Connectors Table 34. STM3241G-EVAL pinout (continued) Pin no. Pin name Description PC14-OSC32_IN 32K_OSC PC15-OSC32_OUT 32K_OSC LED2 PI10 ETHER_RX_ER PI11 USB_HS_DIR VSS_13 VDD_13 FSMC_A0 FSMC_A1 FSMC_A2 FSMC_A3 FSMC_A4 FSMC_A5 VSS_5 VDD_5 SmartCard_OFF SmartCard_RESET...
  • Page 40 All manuals and user guides at all-guides.com Connectors UM1460 Table 34. STM3241G-EVAL pinout (continued) Pin no. Pin name Description ETHER_COL USB_HS_NXT USB_FS_POWER_ON USB_HS_D0 BYPASS BYPASS VDD_4 Audio_DAC_OUT USB_HS_CK CAM_PIXCK ETHER_DV ETHER_RXD0 / MC_ADC12_14 pin 14 (Bus voltage) ETHER_RXD1 / MC_ADC12_15 pin 26 (Heatsink...
  • Page 41 All manuals and user guides at all-guides.com UM1460 Connectors Table 34. STM3241G-EVAL pinout (continued) Pin no. Pin name Description PE15 FSMC_D12 PB10 USB_HS_D3 PB11 ULPI_D4 VCAP1 VCAP / 1.2V VDD_1 ETHER_RXD2 ETHER_RXD3 CAM_HSYNC / MC_NTC_bypass CAM_D0 PH10 CAM_D1 / MC_TIM5_ETR pin 27 (PFC SYNC)
  • Page 42 All manuals and user guides at all-guides.com Connectors UM1460 Table 34. STM3241G-EVAL pinout (continued) Pin no. Pin name Description VDD_9 SmartCard_IO / Audio_I2S_ MCK LED3 SDIO_D0/ MC_TIM3_CH3 pin23 (Dissipative Brake) SDIO_D1 I2S_CKIN USB_FS_VBUS PA10 USB_FS_ID PA11 USB_FS_DM PA12 USB_FS_DP PA13...
  • Page 43 All manuals and user guides at all-guides.com UM1460 Connectors Table 34. STM3241G-EVAL pinout (continued) Pin no. Pin name Description VDD_10 FSMC_NWAIT FSMC_NE1 FSMC_NE2 PG10 FSMC_NE3 PG11 ETHER_TXEN PG12 SmartCard_CMDVCC PG13 ETHER_TXD0 PG14 ETHER_TXD1 VSS_11 VDD_11 PG15 USER_BUTTON JTAG_TDO JTAG_TRST CAN2_RX / ETHER_PPS_OUT / ULPI_D7...

  • Page 44: Appendix A Schematics

    Schematics UM1460 Appendix A Schematics Appendix A contains the schematic diagrams listed below: • Figure 17: STM3241G-EVAL on page 45 • Figure 18: MCU on page 46 • Figure 19: USB-OTG HS on page 47 • Figure 20: Camera on page 48 •...
  • Page 45 All manuals and user guides at all-guides.com Figure 17. STM3241G-EVAL U_Audio U_USB_OTG_HS Audio_IN I2S_MCK I2S_MCK ULPI_D[0..7] ULPI_D[0..7] Audio.SchDoc USB_OTG_HS.SchDoc I2S_CKIN Audio_RST Audio_IN ULPI_STP ULPI_STP U_MCU Audio_SDA I2S_CKIN RESET# MCU.SchDoc Audio_SCL I2S_SCK I2S_SCK ULPI_NXT ULPI_NXT I2S_SD I2S_SD ULPI_DIR ULPI_DIR I2S_WS I2S_WS...
  • Page 46 All manuals and user guides at all-guides.com Figure 18. MCU ULPI_D[0..7] ULPI_D[0..7] TP14 IOs Multiplexed U16A IOs Multiplexed MCO1 PTP_PPS PE15 WAKEUP PE15 PE14 U16B MII_RX_CLK/RMII_REF_CLK PE14 PE13 MII_MDIO PE13 VDD_MCU VDD_SA ULPI_D0 PE12 CAN2_RX PE12 PE11 +3V3 Audio_DAC_OUT PE11 PE10 MII_TXD3 ULPI_CLK...
  • Page 47 All manuals and user guides at all-guides.com Figure 19. USB-OTG HS +3V3 +3V3 +3V3 Green FAULT R207 9013 4.7uF STMPS2141STR@54 ULPI_NXT PSW_N PI11 R206 ULPI_DIR FAULT [N/A] ULPI_STP RREF 12K[1%] VBUS_HS 475900001 ULPI_CLK CLOCK VBUS VBUS ULPI_D[0..7] ULPI_D7 ULPI_D[0..7] PB13 ULPI_D6 PB12 ULPI_D5...
  • Page 48 All manuals and user guides at all-guides.com Figure 20. Camera +2V5 Camera_CLK CN23 R130 C149 CLM-120-02-L-D C150 SM7745HEW-24.0M CN15 +2V8 0.1uF 0.1uF XCLK1 AVDD(2.8V) +1V8 +1V8 PIXCLK +2V8 DCMI_PIXCK PCLK DVDD(1.8V) +1V8 VSYSC DCMI_VSYNC VSYNC DOVDD(2.8V) +2V8 HSYSC DCMI_HSYNC HREF DCMI_D[0..7] DCMI_D0 R213...
  • Page 49 All manuals and user guides at all-guides.com Figure 21. Ethernet MII_CRS PI10 MII_RX_ER MII_COL MII_RXD3 +3V3 MII_RXD2 MII_TXD3 +3V3 MII_TXD2 MII_TX_CLK 1.5K 0.1uF 0.1uF Unused in RMII mode TX_CLK PG11 MII_TX_EN TX_EN PG13 MII_TXD0 TXD_0 PG14 MII_TXD1 TXD_1 TXD_2 TXD_3/SNI_MODE MII_RXD1 RXD_0/PHYAD1 MII_RXD0...
  • Page 50 All manuals and user guides at all-guides.com Figure 22. Audio +3V3 C159 +3V3 C158 0.1uF R221 SDA/CDIN SCL/CCLK R209 I2S_CKIN CLK_OUT AD0/CS AUX_OUT XTI/REF_CLK R211 R110 R112 TST_IN CS2200-CP C154 0.022uF 0.022uF CN11 [N/A] Audio_SDA HP/LINE_OUTA Audio_SCL HP/LINE_OUTB [N/A] SPKR/HP C155 I2S_MCK MCLK...
  • Page 51 All manuals and user guides at all-guides.com Figure 23. USB-OTG FS +3V3 +3V3 OTG_FS_OverCurrent PF11 FAULT VBUS OTG_FS_PowerSwitchOn STMPS2141STR@54 4.7uF Shield 475900001 +3V3 VBUS_FS PA11 OTG_FS_DM PA12 OTG_FS_DP PA10 OTG_FS_ID Green Vbus D+out D+in D-out D-in R180 9013 R181 EMIF02-USB03F2 [N/A] Title: STM32 20-21-45-46 G-EVAL USB_OTG_FS...
  • Page 52 All manuals and user guides at all-guides.com Figure 24. SRAM D[0..15] D[0..15] A[0..20] A[0..20] I/O15 I/O14 I/O13 I/O12 I/O11 I/O10 I/O9 I/O8 DQ10 I/O7 DQ11 I/O6 DQ12 +3V3 I/O5 DQ13 I/O4 DQ14 I/O3 DQ15 I/O2 I/O1 VccIO R52 0 +3V3 I/O0 VccCore +3V3...
  • Page 53 All manuals and user guides at all-guides.com Figure 25. LCD D[0..15] D[0..15] A[0..20] A[0..20] CN19 PG10 FSMC_NE3 R119 R161 R162 R163 FSMC_NWE WR/SCL R164 R165 FSMC_NOE R166 RESET# RESET R167 R168 R169 R170 PD10 R171 BL_GND PD11 R172 BEAD BL_Control PD12 R173 +3V3...
  • Page 54 All manuals and user guides at all-guides.com Figure 26. RS-232 and IrDA +3V3 100nF CN16 100nF DB9-male UART3 or 4 100nF 100nF 100nF T1IN T1OUT PC10 RS232/IrDA_TX T2IN T2OUT T3IN T3OUT R1OUTB Bootloader_BOOT0 R2OUTB R1OUT R1IN R2OUT R2IN R3OUT R3IN PC11 RS232/IrDA_RX Bootloader_RESET...
  • Page 55 All manuals and user guides at all-guides.com Figure 27. CAN +3V3 +3V3 CN10 Default setting: 1<->2 DB9-male CAN connector Default setting: Open 100nF CAN1_TX PB13 CAN2_TX CANH CANL Vref SN65HVD230 CAN1_RX CAN2_RX JP10 do not fit +3V3 Title: STM32 20-21-45-46 G-EVAL CAN Number: MB786 Rev:...
  • Page 56 All manuals and user guides at all-guides.com Figure 28. I/O peripherals R159 COMMON +2V8 Green R155 Selection LED1 Orange R154 To IO expandor LED2 JOY_SEL JOY_DOWN DWON JOY_LEFT LEFT R141 JOY_RIGHT RIGHT LED3 JOY_UP MT008-A Blue R140 LED4 Joystick LEDs +2V8 +3V3 R107...
  • Page 57 All manuals and user guides at all-guides.com Figure 29. I/O expander +2V8 100nF TouchScreen_Y- TouchScreen_X- TouchScreen_Y+ IO_Expandor_SCK SCLK TouchScreen_X+ IO_Expandor_SDA SDAT EXP_IO9 R136 IO_Expandor_INT EXP_IO10 Data in EXP_IO11 A0/Data Out EXP_IO12 R117 STMPE811QTR I2C device address:0x82 R116 100K +2V8 +2V8 C115 100nF EXP_IO1...
  • Page 58 All manuals and user guides at all-guides.com Figure 30. microSD card +3V3 +3V3 MicroSDCard_D1 MicroSDCard_D0 PC11 MicroSDCard_D3 PC10 MicroSDCard_D2 PC12 MicroSDCard_CLK MicroSDCard_CMD PJS008-2000 SMS064FF or SMS128FF PH13 MicroSDCard_Detect MicroSD card Title: STM32 20-21-45-46 G-EVAL MicroSD card Number: MB786 Rev: C.3(PCB.SCH) Date: 7/20/2016 Sheet...
  • Page 59 All manuals and user guides at all-guides.com Figure 31. Motor control +3V3 Motor control connector 3.3K MC_EmergencySTOP EMERGENCY STOP MC_UH MC-UH PH13 MC_UL MC_UL AIN- AIN+ MC_VH MC_VH PH14 MC_VL MC_VL MC_WH MC_WH PH15 MC_WL MC_WL BUS VOLTAGE MC_BusVoltage R219 MC_CurrentA CURRENT A R74 0...
  • Page 60 All manuals and user guides at all-guides.com Figure 32. Smartcard +3V3 +3V3 R124 R125 R157 PH15 SmartCard_3/5V TP11 AUX2 CLKDIV1 AUX2UC TP12 CLKDIV2 AUX1UC R127 AUX1 5V/3V I/OUC SmartCard_IO PGND XTAL2 C125 100nF XTAL1 SmartCard_CLK R126 Vddp SmartCard_OFF C117 C126 C127 100nF +3V3...
  • Page 61 All manuals and user guides at all-guides.com Figure 33. JTAG and trace +3V3 R101 [N/A] [N/A] [N/A] [N/A] PA13 TMS/SWDIO PA14 TCK/SWCLK TDO/SWO PA15 TRST RESET# [N/A] CN13 FTSH-110-01-L-DV CN14 +3V3 JTAG +3V3 +3V3 do not fit R104 0 R100 do not fit R94 0 R91 do not fit R105...
  • Page 62 All manuals and user guides at all-guides.com Figure 34. Power ZEN056V130A24LS +3V3 VDD_MCU CN18 JP32 C106 10uF DC-10B SMAJ5.0A-TR C112 VBUS_HS 100nF BNX002-01 JP18 VBUS_FS TP13 Ground TP10 U5V_ST_LINK LD1086D2M33TR +3V3 LD1117S18TR LD1117STR +2V8 Header 5X2 Vout Vout +1V8 Vout C113 R114 220uF...
  • Page 63 All manuals and user guides at all-guides.com Figure 35. Extension connector EMU_5V APP_3V3 APP_VCC +3V3 APP_3V3 (Top) 21N22564-50S10B (Left) (Right) PH11 33pF PA14 PA15 PH10 PC10 PC11 PC12 PB11 PB10 PE15 PE14 PE13 PE12 EMU_5V PE11 PE10 PG10 EMU_3V3 VBUS_FS EMU_5V PG11 PG12...
  • Page 64 +3V3 T_SWO T_SWDIO_IN R189 T_JTMS TMS/SWDIO T_NRST RESET# T_JRST U5V_ST_LINK TRST 9013 T_JTDI T_JTCK TCK/SWCLK CN21 R191 JTAG R192 USB_DM R193 USB_DP SHELL SHELL R194 USB-typeB connector Title: 1.5K STM32 20-21-45-46 G-EVAL ST-LINK/V2 Number: MB786 Rev: C.3(PCB.SCH) Date: 7/20/2016 Sheet...
  • Page 65 All manuals and user guides at all-guides.com Figure 37. 3.2” LCD module with SPI and 16-bit interface Soldered for i80-system 16-bit interface WR/SCL #RESET RESET BLGND PD10 PD10 PD11 BL_GND PD11 BL_Control PD12 BL_Control PD12 PD13 Soldered for Serial interface only PD13 PD14 PD14...

  • Page 66: Revision History

    All manuals and user guides at all-guides.com Revision history UM1460 Revision history Table 35. Document revision history Date Revision Changes 05-Sept-2011 Initial release. Updated JP24 description. Added warning in Table 5 Chapter 2.5 09-Oct-2011 note in Chapter 2.16 Chapter 2.20. Added note in and updated Chapter 2.5...
  • Page 67 ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.

Table of Contents