User Code Change; Bypassing; Technical Troubles Review; Events Memory Review - Teletek electronics LED63VG Quick Start Manual

User Code Change

The user is required to enter his/
her current personal code before
changing it.
User code change key se-
quence:
CODE 0
PRG
NEW
(4 digits)
CODE
NEW
beeps) (reenter)
CODE

Bypassing

To execute a bypass operation the
user is required to enter a valid
code:
CODE .
BPS ENT
Pressing a numeric key bypasses
the respective zone. The LED, cor-
responding to the zone number,
lights up. Pressing the same key
once again de-bypasses the zone
and the LED goes out.
The selected programming is con-
firmed by pressing .
ENT
Voice Guide Keypad - LED63VG User Manual
Bypassing key sequence (zone
2 used in the example):
2
2
(2
ENT

Technical Troubles Review

To review troubles the user is re-
quired to enter a valid personal
code:
CODE
TRBL
In the events of AC loss and low
battery, the "AC power is lost" or
"Battery discharged" messages will
sound correspondingly 3 times ev-
ery 5 seconds.
Each digit on the display indicates
a specific technical problem.
12
AC lost
Battery low
2
or missing
Fuse
blown

Events Memory Review

To review event memory the user
is required to enter a valid personal
code.
CODE
NOTE: Certain users may not be
allowed to review event memory.
Press
event and
one.
Press the
information on a zone number or
a user code.
13
Information on the events, as well
as the zone numbers and the us-
ers is presented in binary-hexa-
decimal form. Use the table above
to interpret them.
For convenience the table also in-
cludes a graphic representation of
the LEDs as they light up for the
Tamper respective event. A black digit on
white background indicates an ex-
Communication
tinguished LED, and a white digit
error
on dark background indicates a lit
Phone line up LED. Scroll from LED 1 to LED 6
error
to determine the correspondence
between the event displayed on
the keypad and the text in the table.
The first 17 rows in the table are
used for coding the user number
and the zones.
Example: Suppose that the event
MEM
displayed on the keypad is repre-
sented by a LED combination of 2,
3, 5 and 6. The table discloses the
first LED 2 data entry. The next
data entries disclose that of the first
LED 3. Next comes the first data
to for a previous
entry of LED 5 and finally comes
the first data entry of LED 6.This is
for a following
the data entry with the ordinal num-
ber of 27 "Quick arming".
key to see more
ENT
Voice Guide Keypad - LED63VG User Manual