Operation; Arming; Full; Stay - Teletek electronics LED63VG Quick Start Manual

Operation

Arming

The system can be armed only if
the green RDY1 LED is lit up.

Full

Full arming means all zones are
secured. Anyone coming into the
entrance zone is required to enter
a code. Otherwise the alarm is trig-
gered after entrance time is over.
Full arming sequence:
CODE
0
ARM
Quick full arming key se-
quence:
0
ARM
The ARM1 LED lights up.
Voice Guide Keypad - LED63VG User Manual

Stay

Stay arming means the user is al-
lowed to stay in (a) certain zone(s),
but the entrance zone is secured.
Anyone coming into the entrance
zone is required to enter a code.
Otherwise the alarm is set off af-
ter the entrance time is over.
Stay arming key sequence:
CODE
1
ARM
Quick stay arming key se-
quence:
1
ARM
The BPS LED lights up permanently
on the display and the LEDs, cor-
responding to the numbers of the
zones which are not armed, blink
slowly.
8
The new code has been accepted
and the system automatically en-
ters remote access permissions
mode.
The LEDs stand for the remote ac-
cess allowable operations. The lit
numbers indicate the permitted
programs.
Remote
Remote
bypass
disarm
Remote
Remote arm
event memory
review
Remote code
Remote
access
programming
Pressing a numeric key
alternatingly switches over the
state of the respective remote op-
eration from forbidden to permit-
ted.
Pressing the key confirms
ENT
the selection.
17
Voice Guide Keypad - LED63VG User Manual
Remote access permissions
key sequence:
3
3
ENT
Changing User Code and
Rights
To change the user code, the man-
ager is required to enter his per-
sonal code first before the user
code.
User code change key se-
quence:
CODE
PRG
USER
(01-16)
ID
(2 beeps)
3