Overview; Sound Indication; Voice Messages - Teletek electronics LED63VG Quick Start Manual

Bypassing
To execute a bypass operation the
manager is required to enter his
personal code:
CODE
4
PRG
0
Pressing a numeric key bypasses
the respective zone. The display
LED, corresponding to the zone
number, lights up permanently.
Pressing the same key once again
de-bypasses the zone and the LED
goes out.
The selected programming is con-
firmed by pressing the key.
ENT
Bypassing sequence (e.g. zone 2):
2
2
ENT
Voice Guide Keypad - LED63VG User Manual
Setting the Clock
To set the clock the manager is re-
quired to enter his personal code.
The set entries are visualized in
binary-hexadecimal form.
Key sequence for setting the
clock:
CODE
PRG
0 (2 beeps)
NEW
(HHMM)
ENT
TIME
Setting the Date
To set the date the manager is re-
quired to enter his personal code.
The set entries are visualized in
binary-hexadecimal form.
Key sequence for setting the
date:
CODE
PRG
1 (2 beeps)
2
NEW
(DDMM)
ENT
DATE
20
of these substances may lead to
fire.
No liquids should enter the interior.

Overview

The LED63VG Keypad is designed
5
to control the CA60Plus Control
Panel and provides the user with
system status information.
The Control Panel is fully program-
mable with the LED63VG keypad.
An LED indication on the keypad
visualizes the system status and
alarm events information.
A sound buzzer informs the user
about correct or incorrect key en-
tries as well as activated alerts.
Seven voice messages provide the
user with addition information.

Sound Indication

There are seven different sound
combinations that indicate seven
5
different conditions:
• Click – single short beep indicat-
ing the pressing of a key;
• Confirm – two long sound sig-
nals, indicating the system confir-
mation to a successfully executed
operation;
5
• Reject – a single long beep, indi-
cating an incorrectly executed op-
eration;
• Entry time – continuous beep, in-
dicating intrusion into an entrance
zone;
• Exit time – short beeps, indicat-
ing the system is armed and the
user is required to leave the en-
trance zone. Ten seconds before
the exit time is over beep frequency
increases;
• Technical problem – two short
beeps, indicating a technical prob-
lem;
• Chime – short beeps with subse-
quently increasing frequency, indi-
cating intrusion into a zone with an
activated chime option;

Voice Messages

There are seven different voice
messages that indicate different
conditions:
• "System is armed"
• "System is disarmed"
• "Please enter your code to dis-
arm"
• "AC power is lost"
• "Battery is discharged"
• "Please leave the premises"
• "Alarm in the system"
Voice Guide Keypad - LED63VG User Manual