User Level Programming; User Code Changing; Turning On And Off The Chime Mode - Teletek electronics LCD62 User Manual

Event Description
Battery low or missing
Battery recovery

User Level Programming

Blinking symbol
programming mode.

User Code Changing

User is required to enter his/her personal code first before
changing it.
User code changing key sequence:
CODE
0
PRG
22
Event Code Zone / User
41 0
42 0
indicates the system
NEW NEW
CODE CODE
(4 digits) (2 beeps) (once again)

Turning On and Off the Chime Mode

To turn the chime mode on or off the use is required a
personal code.
Turning the chime on and off key sequence:
CODE
is in
Pressing any numeric key switches alternatively the chime
mode on and off. Pressing
Chime
ON
3
PRG
confirms the selection:
ENT
ENT
Chime
OFF
LCD62 Keypad User Manual