LG LV-C362FLA0 Svc Manual page 20

• Select and mark the position for fixing bolts.
• Drill the hole for set anchor on the face of ceiling.
• Insert the set anchor and washer onto the sus-
pension bolts for locking the suspension bolts on
the ceiling.
• Mount the suspension bolts to the set anchor
firmly.
• Secure the installation plates onto the suspension
bolts (adjust level roughly) using nuts, washers
and spring washers.
CAUTION
Tighten the nut and bolt to prevent unit falling
Opening the side panel method
Step1: Remove screw
Step2: Lift side-panel upward slightly
Step3: To move side panel along arrow as shown.
Copyright ©2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Old building
• Local supply
Set anchor
Plate washer
Spring washer
Nut
Suspension bolt
- 20 -
New building
1 Set anchor
2 Plate washer
3 Spring washer
4 Nut
5 Suspension
bolts
- M10
- M10
- W3/8 or M10
- W3/8 or M10
Step2
LGE Internal Use Only
Step1
Step3