Specifications - Makita DTP131 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Impact driver mode
No load speed (min
Impacts per minute (Soft / Medium / Hard)
Hammer drill mode
Drill mode Drilling Capacities
(Low (1) / High (2))
Screwdriver mode
(Low (1) / High (2))
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Intended use
The tool is intended for impact screw driving in wood
and for impact drilling in brick, concrete and stone as
well as for drilling and screw driving without impact in
wood, metal, ceramic and plastic.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841:
Model DTP131
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Model DTP141
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Model
Fastening Machine screw
Capacities
Standard bolt
High tensile bolt
-1
) (Soft / Medium / Hard)
-1
No load speed (min )
(Low (1) / High (2))
-1
Blows per minute (min
(Low (1) / High (2))
Drilling Capacities / Concrete
Steel
Wood
No load speed (min
Fastening Machine screw
Capacities
Self drilling screw
No load speed (min
Net weight
D.C.14.4 V Model
D.C.18 V Model
) : 85 dB (A)
pA
) : 96 dB (A)
WA
) : 85 dB (A)
pA
) : 96 dB (A)
WA
DTP131
0 - 1,400 / 0 - 2,200 / 0 - 2,800
0 - 700 / 0 - 2,800
)
-1
) 0 - 700 / 0 - 2,800
4 mm, 5 mm / 4 mm (Thickness 3.2 mm max.)
-1
) 0 - 300 / 0 - 1,100 (depends on torque setting)
1.5 - 1.7 kg
D.C. 14.4 V
BL1415N / BL1430 / BL1430B / BL1440 / BL1450 / BL1460B
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841:
Model DTP131
Work mode: impact drilling into concrete
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a
Uncertainty (K) : 2.0 m/s
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
4 ENGLISH
4 mm - 8 mm
5 mm - 14 mm
5 mm - 12 mm
0 - 1,300 / 0 - 2,200 / 0 - 2,700
0 - 1,200 / 0 - 2,400 / 0 - 3,200
0 - 700 / 0 - 2,700
0 - 8,400 / 0 - 32,400
8 mm
10 mm / 6.5 mm
21 mm / 12 mm
0 - 700 / 0 - 2,700
3.5 mm - 6 mm / 4 mm - 6 mm
0 - 600 / 0 - 2,300 (P mode)
1.5 - 1.9 kg
D.C. 18 V
Wear ear protection
) : 13.0 m/s
h,ID
2
2
) : 8.5 m/s
h
2
) : 2.5 m/s
h,D
2
DTP141
2
2
or less