Designation Key - Vents 100 Base User Manual

EN

DESIGNATION KEY

100 Base V K Q (220V/60Hz)
Power supply parameters other than 220 V/50 Hz
_ – 220-240 V/50 Hz (by default)
(220V/60Hz) – 220 V/60 Hz
Motor modification:
L – motor on ball bearings
Turbo – high-powered motor
Q – low-noise motor
Q1 – low-noise motor with high performance
Modifications
K – KO non-return valve
K1– KO1 non-return valve
Options:
V – pull cord switch
T – turn-off delay timer
VT – pull cord switch and turn-off delay timer
TH – humidity sensor and turn-off delay timer
VTH – pull cord switch, humidity sensor and turn-off delay timer
Fan series
Base – fan without a decorative front panel
Base-I – fan with an operating indicator
Outlet duct diameter [mm]
10