Using The Accessories - AEG BSE576321M User Manual

9. USING THE ACCESSORIES

WARNING!
Refer to Safety chapters.
9.1 Using the core temperature
sensor
The core temperature sensor measures the
core temperature of the meat.
There are two temperatures to be set:
• The oven temperature. Refer to the table
for roasting.
• The core temperature. Refer to the table
for the core temperature sensor.
CAUTION!
Only use the core temperature
sensor supplied with the
appliance, or genuine
replacement parts.
1. Put the plug of the core temperature
sensor into the socket on the top of the
cavity.
The indicator for the core temperature sensor
flashes.
2. Put the point of the core temperature
sensor into the centre of the meat.
14 ENGLISH
3. Press the button
temperature. You can set the
temperature from 30 °C to 99 °C.
4. Set the oven function and the oven
temperature.
When the meat is at the set core
temperature, an acoustic signal sounds for
two minutes. Press a button to stop the
signal.
5. Deactivate the appliance.
6. Remove the plug of the core temperature
sensor from the socket. Remove the
meat from the appliance.
If the meat is not cooked to your satisfaction,
do the above steps again and set a higher
core temperature.
You can change the temperature at any time
during the cooking. Press
set core temperature.
WARNING!
Be careful when you remove the
tip and plug of the core
temperature sensor. The core
temperature sensor is hot. There
is a risk of burns.
9.2 Inserting accessories
A small indentation at the top increases
safety. The indentations are also anti-tip
devices. The high rim around the shelf
prevents cookware from slipping of the shelf.
or to set the core
to change the