Konica Minolta AeroDR SYSTEM Operation Manual page 57

AeroDR Interface Unit2
1
Turn on the power switch, and confirm
that the Detector Connection LED (green)
and Generator Interface LED (green) are
on�
Detector Connection LED (green)
Generator Interface LED (green)
HINT
• It takes time for the Generator Interface LED (green) to
light.
Detector Interface Unit
IMPORTANT
• For power supply through PoE, supply the power from the
Power Supply Unit.
1
Turn on the power switch of the Power
Supply Unit, and confirm that the LED
(green) is on�
LED (green)
HINT
• When DR Detector is connected, the LED (blue) is on.
• When using the DI Unit AC Adapter, connect the power
cable to a wall outlet and confirm that the LED (green) is
on
IMPORTANT
• For power supply through PoE, supply the power from the
Power Supply Unit.
1
Power switch
• When DR Detector is connected, the LED (blue) is on.
1
57
Startup and shutdown
Detector Interface Unit 2
Turn on the power switch of the Power
Supply Unit, and confirm that the LED
(green) is on�
LED (green)
HINT
Power Supply Unit
Turn on the power switch, and confirm
that the LED (blue) is on�
Power SW
LED (blue)
1
2
3
4
5
6
7
8
9
10
11
12