Connection Examples - Konica Minolta AeroDR SYSTEM Operation Manual

2�1�2 System configuration and connection examples
Basic configuration example
Number Name
(1)
DR Detector
(2)
AeroDR Interface Unit
(3)
AeroDR Interface Unit2
(4)
Hub
(5) Detector Interface Unit
(6) Detector Interface Unit 2
(7)
Power Supply Unit
AeroDR Generator Inter-
(8)
face Unit
AeroDR Generator Inter-
(9)
face Unit2
(10)
Generator Interface Unit 3
(11)
AeroDR Battery Charger
(12)
AeroDR Battery Charger2 Charges the DR Detector. It also has the registration function for the DR Detector.
(13) AeroDR Access Point
(14) Access Point
(15)
I/F Cable
(16)
AeroDR UF Cable
• There are 11 types of DR Detectors: AeroDR 1417HQ, AeroDR 1417S, AeroDR
1717HQ, AeroDR 1012HQ, AeroDR 2 1417HQ, AeroDR 2 1417S, AeroDR 3 1417HD,
AeroDR 3 1717HD, AeroDR 3 1012HQ, AeroDR 3 1417HD2, and AeroDR 3 1717HD2.
• DR Detector is of B-type Applied Parts.
• Supplies power to the AeroDR Generator Interface Unit, AeroDR Generator Interface
Unit2, and access point.
• Supplies power to and charges the DR Detector when the wired cable is used.
• It has a built-in hub function.
• 2 DR Detectors can be connected via wired connection.
• The expansion AeroDR Interface Unit is required for connecting the third to seventh DR
Detectors via wired connection.
• Supplies power to the access point.
• Supplies power to and charges the DR Detector when the wired cable is used.
• It has a built-in hub function.
• 2 DR Detectors can be connected via wired connection.
• The expansion AeroDR Interface Unit is required for connecting the third to seventh DR
Detectors via wired connection.
• Relays signals between the X-ray device, the DR Detector, and the image processing
controller
• Used to connect the AeroDR Generator Interface Unit2 or access point.
• General-purpose product.
• Product conforming to IEC 60950 (CLASS I) or equivalent standards.
• Relays signals between the DR Detector and the image processing controller.
• Supplies power to the DR Detector.
• Relays signals between the DR Detector and the image processing controller.
• Supplies power to the DR Detector.
• Relays signals for serial exposure.
• Supplies power to the Detector Interface Unit, Detector Interface Unit 2, AeroDR Gen-
erator Interface Unit, AeroDR Generator Interface Unit2, Generator Interface Unit 3 and
access point
• Relays signals between the Detector Interface Unit, Detector Interface Unit 2, AeroDR
Generator Interface Unit, AeroDR Generator Interface Unit2, Generator Interface Unit 3,
access point and the image processing controller.
Relays signals between the X-ray device, the DR Detector, and the image processing con-
troller
Relays signals between the X-ray device, the DR Detector, and the image processing con-
troller
• Relays signals between the X-ray device, the DR Detector, and the image processing
controller
• Relays signals for serial exposure, using GIU3 Serial I/F Kit.
Charges the DR Detector. It also has the registration function for the DR Detector.
This communicates with DR Detector when performing an exposure using wireless connec-
tion
• This communicates with DR Detector when performing an exposure using wireless con-
nection
• General-purpose product.
• The AeroDR Access Point 2 is included.
• This communicates with DR Detector when performing an exposure using wired connec-
tion. Also used for charging and registering the DR Detector.
• I/F Cable4 1.5mD, I/F Cable4 8mD, and I/F Cable4 8mU relay signals for serial exposure.
Registers the orientation when the DR Detector is used for exposure in the wall stand/table
position
31
Overview of this device
Functions
1
2
3
4
5
6
7
8
9
10
11
12