Component Names And Functions; Aerodr Detector - Konica Minolta AeroDR SYSTEM Operation Manual

2�2

Component names and functions

2�2�1

AeroDR Detector

Exposure side
(3)
(5) (6) (7)
Number Name
(1)
Triangular mark
(2)
Power switch
(3)
Antenna display
(4)
AeroDR Grip sheet attachment areas
(5)
Exterior
(6)
Protective cover
(7)
LEDs
(8)
Selection switch
(9)
Wired connection connector
(1) (2) (3)
(8) (6)
• Indicates the direction to place the DR Detector in during exposure.
— When exposing in portrait, place the triangular mark upward.
— When exposing in landscape, place the triangular mark to the left or right.
— (Left and right are set during installation according to the exposure envi-
ronment.)
Used to turn the DR Detector on/off.
Displays the place where a wireless antenna is attached.
• Indicates the attachment positions for AeroDR Grip sheet use.
• The AeroDR 1012HQ does not have AeroDR Grip sheet attachment areas.
Protects the internal parts.
Absorbs external shocks.
Indicate the status of the DR Detector.
Notifies the image processing controller that this DR Detector will be used for
the exposure.
Connects to the AeroDR Battery Charger, AeroDR Battery Charger2, wired
cable, and AeroDR UF Cable.
39
(4) (5)
(4)
(9)
Functions
1
2
3
4
5
6
(6) 7
8
9
10
11
12