Aerodr 3 Detector - Konica Minolta AeroDR SYSTEM Operation Manual

2�2�3

AeroDR 3 Detector

(1) (2)
(7)
(8)
(9) (10) (11)
Number Name
(1) Power SW
(2) Selection SW
(3) Front board
(4) Triangular mark
(5)
Antenna
(6)
Back board
(7)
Battery LED
(8)
LINK LED
(9)
Status LED
(10) Mode LED
(11) Information LED
(12) Wired connection connector
HINT
• AeroDR 3 1417HD, AeroDR 3 1717HD, and AeroDR 3 1012HQ have the back board with a different design.
(3) (4)
Exposure side
(5)
Used to turn the DR Detector on/off.
Notifies the image processing controller that this DR Detector will be used for
the exposure.
Protects the internal parts.
• Indicates the direction to place the DR Detector in during exposure.
— When exposing in portrait, place the triangular mark upward.
— When exposing in landscape, place the triangular mark to the left or right.
— (Left and right are set during installation according to the exposure envi-
ronment.)
Displays the place where a wireless antenna is attached.
Protects the internal parts.
Toggles DR Detector status displays and the modes.
Connects to the AeroDR Battery Charger2, and wired cable.
41
Component names and functions
(5)
(12)
Functions
1
(6)
2
3
4
5
6
7
8
9
10
11
12