KI USPF2324 Assembly Instructions Manual

Polyester Felt Screen Model/Mechanism Chart
Screen
Models Mechanism Mechanism
(USPF & 1
USPFF)
USPF2324 Yellow Yellow
USPF2924 Yellow Yellow
USPF3524 Yellow Green
USPF4624 Green Green
USPF5224 Green Yellow
USPF5824 Green Yellow
USPF6424 Green Green
USPF7024 Green Green
USPF8224 Green Pink
USPF2331 Yellow Yellow
USPF2931 Yellow Green
USPF3531 Green Green
USPF4631 Yellow Pink
USPF5231 Green Green
USPF5831 Yellow Pink
USPF6431 Green Pink
USPF7031 Green Green
USPF8231 Pink Green
Pirouette table
fixed-base
Figure 1
Upholstered Screen Model/Mechanism Chart
Screen
Mechanism Models
2 3 (USFA &
USFAF)
N/A USFA2324
N/A USFA2924
N/A USFA3524
N/A USFA4624
Green USFA5224
Green USFA5824
Green USFA6424
Green USFA7024
Yellow USFA8224
N/A USFA2331
N/A USFA2931
N/A USFA3531
N/A USFA4631
Green USFA5231
Yellow USFA5831
Yellow USFA6431
Pink USFA7031
Pink USFA8231
vertical
railway
mounting
bracket
#12 x 1"
PPH screws
Assembly Instructions
Universal Screens
Fixed-Height & Height-Adjustable
October 2020
Mechanism Mechanism Mechanism
1 2
Green Green
Pink Green
Blue Yellow
Blue Pink
Pink Pink
Green Purple
Blue Yellow
Blue Green
Blue Blue
Pink Green
Pink Pink
Blue Pink
Blue Blue
Blue Green
Blue Pink
Blue Blue
Purple Green
Purple Blue
blue, green,
pink, purple or
yellow sticker
Detail A
adjustable
mechanism
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Important: This instruction
consists of two separate instructions,
one explaining how to assemble
Universal Height-Adjustable Screens
and the other explaining how to
assemble Universal Fixed-Height
Screens. If Universal Height-
Adjustable Screens are to be
installed, reference the instructions
on pages 1 through 3. If Universal
Fixed-Height Screens are to be
installed, skip pages 1 through 3 and
proceed to the instructions on page 4.
Universal Height-Adjustable
3
Screens Installation
Note: If tables do not have
N/A pre-drilled holes under the tabletops
for installing screens, retrofitting will
N/A
be required. See page 6, "Retrofit
N/A
Drilling Guidelines."
N/A
1. Carefully remove contents from
Pink
shipping cartons and identify parts
Green and hardware supplied.
Blue
Note: The Universal Height-
Blue
Adjustable Screen may be installed
on Pirouette, WorkUp, and Toggle
Blue
Table models. Certain table models
N/A
allow screens to be mounted on the
side of the table as a divider screen.
N/A
The assembly process is the same
N/A
for divider screens and privacy
N/A
screens. The following instructions
show the installation of a privacy
Blue
screen to a 24 x 48" Pirouette
Blue
Fixed-Base Rectangular Table, your
configuration may vary.
Blue
Purple
Important: Five different adjustable
Purple
mechanisms are designed to install
for different screen widths/weights.
Each of the five mechanisms is
weight-balanced differently and is
color coded with a different blue,
green, pink, purple or yellow round
sticker applied under the mounting
bracket. It is important to reference
the Screen Model/Mechanism
Charts on this page and use the
correct mechanisms per the screen
model being installed. If screens are
installed with the incorrect adjustable
mechanisms, screens will not be
counter balanced properly and
disassembly and correct reassembly
will be required (Detail A).
2. Locate an adjustable mechanism
per the screen model being installed
and position the mounting bracket
to align with the pre-drilled holes on
the underside of the tabletop. Secure
mechanism to the underside of the
tabletop using four #12 x 1" screws
(Figure 1).