Summary of Contents for ICP DAS USA WISE-5801-MTCP
Page 1
Thank you for purchasing WISE-5801-MTCP – the Intelligent Data Logger PAC controller for remote monitoring and control application. This Quick Start Guide will provide you with minimum information to get started with WISE-5801-MTCP. It is intended for use only as a quick reference. For more detailed information and procedures, please refer to the full user manual on the CD included in this package.
Page 2
--------------------------------------------------------------------- Connecting to PC, Network and Power The WISE-5801-MTCP is equipped with an RJ-45 Ethernet port for connection to an Ethernet hub/switch and PC. You can also link directly the WISE-5801-MTCP to PC with an Ethernet cable. WISE-5801-MTCP WISE-5801-MTCP User-defined I/O & Data Logger Module - QuickStart (May/2018) ICP DAS USA, Inc.
------------------------------------------------------------------------- Using MiniOS7 Utility to Assign a New IP The WISE-5801-MTCP is an Ethernet device, which comes with a default IP address, therefore, you must first assign a new IP address to the WISE-5801-MTCP. WISE-5801-MTCP User-defined I/O & Data Logger Module - QuickStart (May/2018) ICP DAS USA, Inc.
Page 4
WISE-5801-MTCP User-defined I/O & Data Logger Module - QuickStart (May/2018) ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717...
Page 5
WISE-5801-MTCP User-defined I/O & Data Logger Module - QuickStart (May/2018) ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717...
Page 6
Go to WISE-5801-MTCP Web Site to edit Control Logic Please follow the steps below to implement IF-THEN-ELSE control logic on controllers: Step 1: Open a browser, and type in the URL address of the WISE-5801-MTCP Open a browser (recommended using Internet Explorer, new version is better). Type in the URL address of the WISE-5801-MTCP module in the address bar.