Panasonic KX-TD816E User Manual page 120

4.2 DPT Features
Conditions
• In Verified - All Calls mode, you must always enter a pre-assigned account code when
making any of the following calls unless it has previously been stored in memory:
a) Call Forwarding — to CO Line
b) Manual Dialling (Selecting a CO line)
c) Notebook Function
d) One-Touch Dialling
e) Pickup Dialling (Hot Line)
f) Redial, Last Number
g) Redial, Saved Number
h) Station Speed Dialling
i) System Speed Dialling
• In Option mode, it is possible to record a calling or called party's account code in the
SMDR, during a conversation or within fifteen seconds after the other party hangs up.
• There is no need for account code entry when receiving incoming calls.
• Dialling " " while entering an account code allows you to clear the number and re-
enter.
• Pressing the flexible button assigned as the Account button while entering an account
code cancels the entry.
• An account code can be up to five numeric digits (0 through 9). RECALL,
FLASH/RCL, PAUSE, etc. are not allowed. After entering an account code, the
delimiter "#" or "99" must be entered.
• An account code can be stored into Memory Dialling ("Notebook Function," "One-
Touch Dialling," "Pickup Dialling (Hot Line)," "System/Station Speed Dialling,"
"Call Forwarding — to CO Line"). The sequence to enter an account code into
Memory Dialling is:
— [Feature Number] [Account Code] [#] [Line Access Code] [Phone Number]
— [Feature Number] [Account Code] [99] [Line Access Code] [Phone Number]
• If an entered account code does not match a pre-assigned account code in the
verified-all calls mode or the verified-toll restriction override mode,
1) When making an outside call, a reorder tone is returned.
2) While having a conversation, the code entry is accepted and the call is maintained
(= Option mode).
3) After a CPC signal
mode).
• If an entered account code matches a pre-assigned account code when making an
outside call, the charge fee of the account code is totalized.
• If you use an account code which is for a private call, the phone number of the
destination is not recorded on SMDR.
or
has been detected, the code entry is accepted (= Option
* 3
A
4-11
DPT Features