Panasonic KX-TD816E User Manual page 197

M
Checking and Selecting a message by the receiver
1
MESSAGE
Calling back the message sender
1
2
MESSAGE
3
Clearing all messages by the message receiver
1
2
7 0
3
your extension number
4-88
DPT Features
If there is any message, the message waiting lamp (MESSAGE
indicator) light is on.
When the telephone is idle and on-hook;
1. Press the MESSAGE button repeatedly until the desired
message appears.
• The stored messages are shown on the display in the order
they were received.
<Example>
When Tony at extension 123 left a message, the display
shows:
123:Tony
1. Lift the handset or press the SP-PHONE/MONITOR button.
• You hear a dial tone 4.*
2. Press the MESSAGE button or dial the feature number (70)
and 2.
• If you have more than one message at your extension, the
line is connected to the message sender which you select.
3. Start talking.
• The message is cleared after the conversation.
1. Lift the handset or press the SP-PHONE/MONITOR button.
• You hear a dial tone 4.*
2. Dial the feature number (70) and 0.
0
3. Dial your (message receiver's) extension number.
• All messages are cleared.
4.2 DPT Features