Panasonic KX-TD816E User Manual page 460
Digital super hybrid system
Hide thumbs
Also See for KX-TD816E:
- Installation manual (600 pages) ,
- User manual (393 pages) ,
- Service manual (95 pages)
Table of Contents
Advertisement
8
Charge Fee Reference
— Extension Charge Fee Reference
• Enter the programming mode.
• Dial 8.
• Enter ID Code.
• Dial 1 + extension number.
• Press SEL (S1) button.
• Press the desired button (CLR, STORE,
NEXT, or PREV), if required.
• Press HOLD (END) button three times.
• Exit the programming mode.
— CO Line Charge Fee Reference
• Enter the programming mode.
• Dial 8.
• Enter ID code.
• Dial 2.
• Dial CO line number as follows.
- 01 - 08 : if connected to the KX-TD816
- 01 - 24 : if connected to the KX-TD1232
• Press SEL (S1) button.
• Press the desired button (CLR, STORE,
NEXT, or PREV), if required.
• Press HOLD (END) button three times.
• Exit the programming mode.
— Account Code Charge Fee Reference
• Enter the programming mode.
• Dial 8.
• Enter ID Code.
• Dial 3 + location number (01 through 40).
• Press SEL (S1) button.
• Press the desired button (CLR, STORE,
NEXT, or PREV), if required.
• Press HOLD (END) button three times.
• Exit the programming mode.
— Total Extension Charge Fee Reference
• Enter the programming mode.
• Dial 8.
• Enter ID Code.
• Dial 4.
• Press SEL (S1) button.
Quick Reference
— Total CO Line Charge Fee Reference
— Total Account Code Charge Fee
— Account Code Set
• Press the desired button (CLR or STORE),
if required.
• Press HOLD (END) button twice.
• Exit the programming mode.
• Enter the programming mode.
• Dial 8.
• Enter ID Code.
• Dial 5.
• Press SEL (S1) button.
• Press the desired button (CLR or STORE),
if required.
• Press HOLD (END) button twice.
• Exit the programming mode.
Reference
• Enter the programming mode.
• Dial 8.
• Enter ID code.
• Dial 6.
• Press SEL (S1) button.
• Press the desired button (CLR or STORE),
if required.
• Press HOLD (END) button twice.
• Exit the programming mode.
• Enter the programming mode.
• Dial 8.
• Enter ID code.
• Dial 7 + location number (01 through 40).
• Press CLR (S2) button.
• Enter new account code.
• Press STORE button.
• Press HOLD (END) button twice.
• Exit the programming mode.
Quick Reference
8-3
Advertisement
Chapters
Table of Contents
