Product Outline - Fujitsu QFP-100P Operation Manual

1. Product Outline

■ Product outline
This product is a header board (referred to as header board) used to connect the MCU board (Model
number : MB2146-301, MB2146-303) which mounted an evaluation MCU in the F
of Fujitsu 8-bit microcontrollers to a user system. To build an F
combine three products as shown in Figure 1: the header board, MCU board, and BGM adapter
(Model number : MB2146-09).
■ Product configuration
Table 1 lists the product configuration in the header board, and Table 2 lists options.
Name
F 2 MC-8FX
QFP-100P (0.65 mm pitch)
header board
[Model number : MB2146-251]
[Model number : YQPACK100RB]
(Tokyo Eletech Corporation)
[Model number : NQPACK100RB179]
(Tokyo Eletech Corporation)
[Model number : HQPACK100RB179]
(Tokyo Eletech Corporation)
Name
BGM adapter
[Model number : MB2146-09]
MCU board
[Model number : MB2146-301, MB2146-303]
* : Several types of evaluation MCUs are available depending on their applications. Purchase the one that satisfies the
service conditions.
BGM adapter
Figure 1 System configuration
Table 1 Product cofiguration
Description
Connector/QFP100pin
(0.65 mm pitch) Package conversion
I/F between header board and NQPACK
User system mounting
It is used at the time of mass production
MCU mounting to NQPACK.
Table 2 Option
Description
ICE unit for F 2 MC-8FX
Built-in MB95FV100B-101,
MB95FV100B-103
2 MC-8FX family
2
MC-8FX evaluation environment,
MCU board
Header board
Remarks
-
Accessory
(Finishing connection)
Accessory
Accessory
Remarks
-
Built-in F 2 MC-8FX evaluation MCU *
1