Fujitsu QFP-100P Operation Manual page 9

Connection at the time of
■ Disconnection
1. Remove the MCU board from the header board. Detach the four corners slowly in sequence not
to excessively force the junction with the NQPACK.
2. Remove all of the four screws from the header board. Pull out the header board vertically from
the NQPACK. Remove the header board slowly not to excessively force the junction with the
NQPACK.
6
shipment
User system
Figure 5 Connecting MCU board/header board to user system
Evaluation
MCU
YQPACK
NQPACK
MCU board
MCU board
Screws for securing
Header board
Header board
YQSOCKET