Download Print this page
Reliable DH80 Quick Start Manual

Reliable DH80 Quick Start Manual

Dry extended coverage horizontal sidewall sprinkler
Hide thumbs Also See for DH80:

Advertisement

Quick Links

Features
Coverage for long and narrow light hazard spaces such as
hallways, decks, and rooms
Coverage area up to 28 ft (8.5m) long and 14 ft (4m) deep
Available in four trim styles and a variety of finish combina-
tions.
Product Description
The Reliable Model DH80 Dry Extended Coverage Horizontal
Sidewall Sprinkler is a quick-response sprinkler utilizing a
sensitive 3mm glass bulb thermal element listed for use in light
hazard applications.
Dry sprinklers are intended for use on wet, dry, and preaction
systems to protect indoor and outdoor areas that are subject
to freezing. When used on wet systems, it is important that a
minimum exposed length of barrel inside the face of the wall or
insulation is provided to offset conduction of potentially freezing
temperatures from the unconditioned (sprinkler) end along the
barrel. See Figure 6 for guidelines on using dry sprinklers on wet
systems.
Environments where dry sprinklers are employed are often
corrosive. For this reason, Model DH80 dry sprinklers have a
special wax fillet placed in the gap between the cup that
supports the bulb and the wrenching boss. This wax prevents
contaminants from entering the internal portion of the drop nipple
and must not be removed.
Max. Working
Sprinkler Model
DH80 Dry EC
Maximum Coverage Area
Pressure
Width x Length
psi (bar)
ft x ft (m x m)
250 (17.2)
28 x 14 (8.5 x 4.3)
Model DH80 Dry Extended Coverage
DH80 Dry EC HSW with standard escutcheon
Application
The Model DH80 is a horizontal sidewall dry sprinkler intended for
installation in light hazard occupancies in accordance with NFPA
13. These sprinklers are designed to provide fire protection
in long and narrow spaces such as hallways, corridors, decks
and rooms up to 28 feet (8.5m) wide and 14 feet (4.3m) deep.
Model DH80 sprinklers are rated for 175 psi (12 bar) and can be
mounted between 4 and 12 inches (102 and 305mm) down from
the ceiling.
Flow Rate
gpm (L/min)
40 (151)
www.reliablesprinkler.com
Bulletin 055 January 2022
Horizontal Sidewall Sprinkler
Sprinkler
Pressure
Identification
psi (bar)
Number (SIN)
25 (1.7)
cULus Listed
Table A
RA5532

Advertisement

loading

Summary of Contents for Reliable DH80

  • Page 1 28 feet (8.5m) wide and 14 feet (4.3m) deep. Environments where dry sprinklers are employed are often Model DH80 sprinklers are rated for 175 psi (12 bar) and can be corrosive. For this reason, Model DH80 dry sprinklers have a...
  • Page 2 Model DH80 EC Horizontal Sidewall Sprinkler SIN RA5532 Technical Specifications Sprinkler Finishes Style: See finish combination tables on following Extended Coverage pages Horizontal Sidewall Threads: 1” NPT or ISO7-1R1 Sensitivity Nominal K-Factor: 8.0 (80) Quick Response Max. Working Pressure: 175 psi (12 bar) Max.
  • Page 3 Model DH80 Dry Sprinkler with Standard Escutcheon Figure 2 Ceiling 15/32" [12mm] 1-13/16"" 4" [102mm] Min. [46mm] Sprinkler Can 12" [305mm] Max. System Tee Inlet Fitting 5/8" [16mm] 3" Dia. [76mm] 2-1/8" Dia. [54mm] 1/4" [6mm] Nominal Hole in Wall...
  • Page 4 Model DH80 Dry Sprinkler with HB Escutcheon Figure 3 Ceiling Escutcheon Sprinkler Can 1-13/16"" Inlet Fitting [46mm] System Tee 5/8" [16 mm] 3-1/2" [89 mm] Dia. 2 1/2" Dia. [64 mm] Hole in Wall 1-1/4" 1-1/4" [32mm] Nominal [32mm] 055HB Projection 1/2"...
  • Page 5 "A" Dimension = 3-1/2" to 36" (90mm to 900mm) Note: Do not install the Model DH80 Dry Sprinkler with FP recessed escutcheon in locations where there is positive pressure in the cavity behind the sprinkler relative to the pressure at the sprinkler.
  • Page 6 "A" Dimension = 3-1/2" to 36" (90mm to 900mm) Note: Do not install the Model DH80 Dry Sprinkler with SWC cover plate in locations where there is positive pressure in the cavity be- hind the sprinkler relative to the pressure at the sprinkler.
  • Page 7 Figure 6 Bulletin 055 Page 7 of 10 January 2022 www.reliablesprinkler.com...
  • Page 8 Figure 7 Bulletin 055 Page 8 of 10 January 2022 www.reliablesprinkler.com...
  • Page 9: Installation (General)

    (see Figure 8). Care must be taken not to damage the deflector during installation. Reliable Model DH80 dry sidewall sprinklers may be installed in Do not over-tighten sprinklers into fittings. It is recommended ductile or malleable cast iron threaded tees, or CPVC tees and...
  • Page 10: Maintenance

    XLO2 Wrench (FP recessed and SWC trims) Maintenance Ordering Information Specify: Reliable Model DH80 series sprinklers should be inspected and the sprinkler system maintained in accordance with NFPA 25, as well as the requirements of any Authorities Having Jurisdiction. Sprinkler Type Prior to installation, sprinklers should remain in the original •...

This manual is also suitable for:

Dh80 dry ec