Dry Vacuum Mode - Bissell SPINWAVE 2859 Series Manual

Mop Mode
(continued)
Maintaining the Mop Pads and Debris Trap
Wate r
1. 2.
Turn the Power Switch OFF. Firmly pull up on the Mop
Press the button on top of the Pads to remove from mop pad
Mop Tank and pull to remove. drivers. Replace Mop Pads if
Place tank upside down on a damaged.
soft surface.
4. 5.
To reattach, use the middle While in mopping mode,
hole on the pads to align with your SpinWave
the driver. sweep up a limited amount of
dry debris, so be sure to empty
the trap after each clean.

Dry Vacuum Mode

For more help, visit BISSELL.ca/support.
Manual Cleaning
In Dry Vacuum Mode, your BISSELL® SpinWave
Cleaning Brushes, a rotating brush roll and powerful suction to clean multiple floor types in your home.
1. 2.
Turn the robot ON. Press When finished, press the
the Start/Pause Button to start Start/Pause Button again to
cleaning. stop the robot.
3.
Machine wash separately
in warm water. Use only liquid
detergents. Do not use bleach
or fabric softener. Tumble dry
on low. Do not iron or dry clean.
6.
Pull down to open dry
Plus Robot can debris trap door and empty
TM
debris.
Plus Robot will clean using a combination of dual Edge-
TM
x2
3.
Return the robot to the dock.
Press the Start/Pause Button
twice. The light ring will flash
white as it finds its way back.
BISSELL.ca 7