Motorola moto g PURE User Manual page 147

Network and internet
2. Touch Manage allowed devices > Add allowed device.
3. For each device, enter the MAC address and device name.
4. Once you add allowed devices, they are saved unless you delete them, and you can turn this feature on
and off by checking or unchecking Allow all devices any time.
To restrict access for a previously allowed device, touch the device name, then touch Delete.
View or change hotspot password
1. Go to Settings > Network & internet > Hotspot & tethering.
2. Touch Wi-Fi hotspot.
3. Touch Advanced > Hotspot password to see the current password.
4. To change the password, type over the current password.
Note: Although you can turn off passwords for your hotspot, keeping a password prevents unauthorized
usage of your cellular data.
USB tethering
To connect a device to the internet using your phone's cellular data and a USB cable:
1. Check that cellular data is
share.
2. Connect your phone to your computer with a USB cable.
3. On your phone, go to Settings.
4. Touch Network & internet > Hotspot & tethering.
5. Turn on USB tethering to start the connection.
You'll see in your notifications.
To stop the connection, touch the notification and turn off USB tethering, then disconnect your phone and
computer.
Bluetooth tethering
To connect a device to the internet using your phone's cellular data and a Bluetooth connection:
1. Check that cellular data is
share.
2. Turn on Bluetooth on your phone and
3. Set up the other device to get its network connection via Bluetooth.
4. On your phone, go to Settings.
5. Touch Network & internet > Hotspot & tethering.
6. Turn on Bluetooth tethering to start the connection.
You'll see in your notifications.
To stop the connection, touch the notification and turn off Bluetooth tethering.
on. If cellular data is off, your phone doesn't have an internet connection to
on. If cellular data is off, your phone doesn't have an internet connection to
pair with the other device.
138