Motorola moto g PURE User Manual page 146

Network and internet
3.
Touch Wi-Fi hotspot and turn it on
drains the battery!
When your hotspot is active, you'll see
4. Set up the connection.
To connect
A phone
Other device
Manage hotspot connections
To see the number of devices connected to your hotspot:
•
In quick settings, look below
•
Or, go to Settings > Network & internet > Hotspot & tethering and look under Wi-Fi hotspot.
By assigning a password
your knowledge or permission.
To disconnect all devices and prevent them from reconnecting:
1. Turn the hotspot off.
2. Change the password.
3. Turn the hotspot back on to continue using it.
If you're experiencing performance issues, you can limit the number of connections allowed or temporarily
disconnect devices.
1. Go to Settings > Network & internet > Hotspot & tethering.
2. Touch Wi-Fi hotspot > Advanced > Manage devices.
3. Do any of the following:
•
To limit number of devices allowed, touch Device limit.
•
To temporarily disconnect devices until your next hotspot session, under Connected devices, touch
the device's name > Disconnect. The device will remain unable to connect until you turn off and
restart the hotspot.
To allow only specified devices to connect:
1. Get the MAC addresses of the devices you want to allow to connect. (Connect devices to the hotspot
normally, then go to Manage devices, and touch the name of each connected device to view its MAC
address.)
, then plug in your phone to charge. Using the hotspot really
Do this
a.
On your phone, next to the hotspot's name, touch
b. Use the other phone's camera to scan the QR code that provides the password.
a. Open the device's Wi-Fi settings.
b. Select your phone's hotspot.
c. Enter the hotspot password.
.
for your hotspot, you ensure that people can't connect to your hotspot without
in the status bar.
Learn how to find the hotspot's password.
and unlock if prompted.
137