Error Display; Daily System Restart; Cleaning - Hans Grohe RainBrain 15841 Series Instructions For Use Manual

Error display

Whenever an error occurs, an error message appears and all showers are
stopped.
Three types of errors can occur:
1. No danger:
Errors that present no danger to the user or unit and aff ect only e.g. the
water volume. You can still shower if the selected functions are not aff ected
by this error.
The base image appears after acknowledgment. The system will be avail-
able again.
2. Emergency mode (ill. 3):
Even though an error has occurred, you can continue to shower in
emergency mode. An emergency mode message appears. Only the hand
shower and the light can be selected. If no hand shower is confi gured, the
third endagerment follows.
3. Endangerment: (ill. 1 and 2)
Errors that lead to endangerment of the user due to e.g. scalding or
endangerment of the machine cause the system to longer be available. Go
to the error list at the system level, note the uppermost error and report it to
Hansgrohe Service.
1 Warning
CAUTION
An error has occurred! The
system has been stopped.
Operating instructions
Next
English:
Warning
2
00800000 04 2008.10.24 - 07:42:39
00800000 02 2008.10.24 - 07:12:54
Acknowledge error?
3
Emergency ope-
ration
Warm up
38,
34,
Volume
13:56

Daily system restart

The Hansgrohe RainBrain system automatically restarts daily at 12 o'clock
in the afternoon. During this restart the positions of the motors are checked
and the touch panel is restarted.
In order for the restart to occur, the touch panel must be in standby mode.
If this is not the case, the restart is postponed by a half hour until the restart
can take place.

Cleaning:

To clean the touch panel press the power button for 3 seconds. The touch
display switches off and does not respond to touch. To switch it back on
again, press the power button for another 3 seconds.
Yes
°C
°C
5
0
Menu
61