Mounting Locations - TELETRAC NAVMAN Qtanium 100 Installation Manual

Mounting Locations

3
Important The Qtanium 100 contains an accelerometer that detects movement. It is
critical that the Qtanium 100 is mounted securely and cannot move independently of
the asset OR vibrate off its mounting location. Insecure mounting may result in false or
incorrect vehicle movement alerts.
The installation is considered to be permanent as the firmware can be updated without
removing the Qtanium 100 from the asset. Always comply with the following important
installation information:

Ensure that the chosen mounting location will protect the Qtanium 100 from
damage when stacking the chassis or operating the asset.

Optimal GPS performance will be achieved if the mounting location provides the
Qtanium 100 with a clear view of the sky.

If the mounting location is on a HORIZONTAL surface, the Qtanium 100 must face UP
or DOWN.

If the mounting location is on a VERTICAL surface, the Qtanium 100 must be
horizontal with the label facing DOWN.
6
Qtanium 100 | Installation Manual