Reloading The Program - Yamaha Silent SB Series Service Manual

RELOADING THE PROGRAM

Preparation
What you need:
1. Personal computer Windows95/98
2. Add-in board for input/ output of MIDI signals (card)
Examples: Yamaha PPC10XG (with MIDI BOX)
Roland
TDK
3. MIDI conversion adapter
4. MIDI cable x2
5. FD for version upgrade
First, make sure that an external MIDI driver is installed to
your PC.
1) Starting the program
1. Get your PC to work.
2. Run Explorer.
3. Insert the maintenance FD. Double click
"LoadProjectCDP.exe" on the FD and start it. (Fig. 1)
4. Check that "KS1" is displayed at the upper left.
5. If "KS1" is not displayed, go to 2) Changing Alias.
6. If "KS1" is displayed, click the Start (S) button and
proceed to 3) Displaying the dialog for version checking.
* Error occurs on a PC that has no external MIDI
driver installed to it. Restart the program after setting
the MIDI driver. (Supplement 1)
* "KS1" is a classifying name for DU1A sensor.
(Fig. 1)
2) Changing Alias
1. If Alias sensor program is not registered, you have
to set for the program for the model on which you
want to rewrite Alias.
2. Click the "Alias" menu. Select "KS1" from the
drop-down list. "KS1" is displayed at the upper
left. (Fig. 2)
SCP55A (PC card)
DMC9000
3. If "KS1" is not displayed in the list, you have to
perform the "Registration of Alias."
* On the Alias menu, specify the file containing the
new program you want to update and the loader,
and also specify the site (folder) containing the
information (Filter.ini) file. (Supplement 2)
(Fig. 2)
3) Displaying the dialog for version checking
1. Check the version you want to update to and click the
"Rewrite" button. The program will run. (Fig. 3)
(Fig. 3)
4) Displaying the progress
1. You can check the progress of update on the "bar."
(Fig. 4)
2. Updating "KS1" takes about 1 minute 40 seconds.
(Fig. 4)
SILENT SB SERIES
21