SeaLevel ISO-16.PCI User Manual page 7

INSTALLATION, CONTINUED
Hardware Installation
The adapter can be installed in any 5V PCI expansion slot.
Do not install the Adapter in the machine until the software has been fully installed.
1.
2.
3.
4.
5.
6.
7.
8.
Installation is finished.
© Sealevel Systems, Inc.
Turn off PC power. Disconnect the power cord.
Remove the PC case cover.
Locate an available 5V PCI slot and remove the blank metal slot cover.
Gently insert the PCI adapter into the slot. Make sure that the adapter is seated
properly.
After the adapter has been installed, the cables should be routed thru the opening in
the bracket. This bracket also features a strain relief function that should be used to
prevent un-expected cable removal.
Replace the screw you removed for the blank and use it to secure the adapter into the
slot. (This is required to ensure FCC Part 15 compliance.)
Replace the cover.
Connect the power cord
8006H Manual | SL9023H 9/2021
7