Advertisement
Quick Links
Also available from SECO-LARM:
E-964-Q165Q
E-932-D33TBQ
E-932-S16RRQ
Quad Photobeam Detectors
Flush-Mount Photobeam Sensors
• E-932-D33TBQ – Photoelectric
• 4 models available.
Through-Beam Sensor.
• Up to 660 ft. (200m).
• E-932-S16RRQ – Photoelectric
• Selectable 4-channel beam
Reflective-Beam Sensor.
frequency.
• Suitable for entrances, hallways,
• Built-in heater.
room in office or home.
• Buzzer for beam alignment.
• Fits single-gang box.
• Weatherproof, sunlight-filtering
• Adjustable alignment angle from
case for indoor and outdoor use.
+/- 15
• Quick, easy installation with built-in
vertically.
laser beam alignment system.
WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal
service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM's obligation is
limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM.
This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect,
repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that
such equipment is not operating properly as a result of causes other than defects in material and workmanship.
The sole obligation of SECO-LARM, and the purchaser's exclusive remedy, shall be limited to replacement or repair only, at
SECO-LARM's option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal
or property damages of any kind to the purchaser or anyone else.
NOTICE: The information and specifications printed in this manual are current at the time of publication. However, the
SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right to
change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2008 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or in
part, without the written permission of SECO-LARM.
SECO-LARM's ENFORCER Twin Photobeam detector series are protected by the following patents:
U.S. pat. no. D485774 ; Taiwan pat. no. 89463 ; China pat. no. ZL03311103.0
Other international patents are pending.
SECO-LARM
SECO-LARM
SECO-LARM
U.S.A., Inc.
U.S.A., Inc.
U.S.A., Inc.
SECO-LARM
SECO-LARM
®
U.S.A., Inc.
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326
E-9622-4B25
Curtain / Barrier Sensors
Other versions available
• Available in 4, 6, 8 or 10 beams.
• Range: 25 ft. outdoor,
50 ft. indoor.
• Slim-line design
• Weatherproof IP65 construction.
• Triggers on breaking of any
single or 2 adjacent beams
(programmable).
o o o o o
horizonatally /
file:DTP\Manual\MIE964D_US/0804
Website: www.seco-larm.com
E-mail: sales@seco-larm.com
12
E-964-D390Q
E-960-D290Q –
/
" x 1
/
".
7
5
8
16
E-960-D190Q –
E-960-D90Q –
* Multi-frequency version
PITSW3
SECO-LARM
Note: Products with model number that ends with "Q" or have a green "Q" sticker represents RoHS compliant products.
MANUAL
Twin Photobeam Detectors
*
–
390 ft. (120m) outdoors, 790 ft. (240m) indoors
290 ft. (90m) outdoors, 590 ft. (180m) indoors
190 ft. (60m) outdoors, 390 ft. (120m) indoors
90 ft. (30m) outdoors, 190 ft. (60m) indoors
Advertisement
Related Manuals for SECO-LARM Enforcer Sensor E-964-D390Q
Summary of Contents for SECO-LARM Enforcer Sensor E-964-D390Q
- Page 1 WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM’s obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM.
-
Page 2: Table Of Contents
TABLE OF CONTENTS Fig. 12: Dimensions Important ........... Beam Frequency Selection Chart ...... 7 (E-964-D390Q Model Only) Upper View Choosing a Location ........Multiple Sensors Sample Applications ..7-8 Typical Installations ........4 Adjusting the Alignment ......... 9 Running the Cable ........... 4 Adjusting the Delay Time ....... -
Page 3: Choosing A Location
Adjusting the Delay Time Fig. 1: Identifying the Sensors Fig. 11: 1. The delay time adjustment knob sets how long the beam can be interrupted Receiver Transmitter Mounting Plate Adjusting the Terminals before triggering the alarm (see fig. 11): Delay Time Signal LED Frequency selection* a. -
Page 4: Typical Installations
Typical Installations Adjusting the Alignment Fig. 10: The photoelectric beam lens can be adjusted horizontally ±90°, and vertically ±5° (see fig. 2). This The transmitter and receiver sensor units can be adjusted ±5º Horizontal and Vertical allows much flexibility in terms of how the transmitter and receiver can be mounted. See fig. 3. vertically and ±90º... -
Page 5: Wiring The Transmitter - Pole Mount
Wiring the Transmitter – Pole Mount 3. Two layer (double stacked) applications. reattach the sensor unit to the mounting plate, (NOTE – Pole mounting bracket required.) connect the wires, and snap on the cover. Sensor #1 Sensor #2 Sensor #3 See fig. -
Page 6: Examples Of Ways To Connect Sensors
Fig. 9: Examples of Possible Ways To Connect One or More Sensors Selectable 4-channel beam frequency (For E-964-D390Q model only) The sensor beam frequency can be set at different levels on-site to avoid interference from other twin Control panel (12VDC) photobeam sensors nearby.