Advertisement
Quick Links
Advertisement
Related Manuals for Larson Electronics EMGBALL-LED1-LV
Summary of Contents for Larson Electronics EMGBALL-LED1-LV
- Page 1 EMGBALL-LED1-LV INSTRUCTION MANUAL...
- Page 2 Replacement Emergency Ballast for EMG Explosion Proof LED Light Fixtures with Low Voltage Bulbs Instruction Manual Thank you for your purchase of the EMGBALL-LED1-LV from Larson Electronics. WARNING Standard Warning (General) WARNING: READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
-
Page 3: Installation
AC driver from the LED load. If used without an AC driver, and remote mounting more than 5 feet from the luminaire, please consult the factory to determine the necessary wire gauge. CAUTION: Remote mounting can result in reduced power output. Phone: 877-348-9680 Larson Electronics, LLC 2 of 4 Fax: (903) 498-3364 www.larsonelectronics.com... -
Page 4: Operation
Inspect for good working condition prior to storage and before re-use. REPLACEMENT PARTS The EMGBALL-LED1-LV is designed to provide years of reliable performance. Should the need for replacement parts arise, please contact Larson Electronics. -
Page 5: Wiring Diagrams
For short-term testing of the emergency function, the battery must be charged for at least one hour. The emergency driver must be charged for at least 24 hours before conducting a long-term test. Phone: 877-348-9680 Larson Electronics, LLC 4 of 4 Fax: (903) 498-3364...