Rotel RMB-1095-3 Technical Manual

T echnical
Manual
Table of Contents
Specification.....................................1
Parts List ..........................................2 ~ 7
Adjustment........................................8
PCB Assembly .................................9 ~ 10
Schematic Diagram..........................11 ~ 12
Specification
Continuous Power Output
(20-20kHz, < 0.03%)
DIN Power Output (1kHz, 1%)
Total Harmonic Distortion (20Hz-20kHz, 8 ohms)
Intermodulation Distortion (60Hz : 7kHz, 4:1)
Frequency Response ( 0.5dB, -3 dB)
Damping Factor (20-20,000kHz, 8 ohms)
Speaker Impedance
Signal to Noise Ratio (IHF A network)
Input Impedance / Sensitivity
Power Requirement
Power Consumption
Dimensions (W x H x D)
Weight (net)
SHINSEN-BLD. 4F 10-10 SHINSEN-CHO, SHIBUYA-KU,
TOKYO 150-0045, JAPAN
Quality Uncompromised
FIVE-CHANNEL POWER AMPLIFIER
RMB-1095-3
200 wats/ch into 8 ohms
330 wats/ch into 4 ohms
< 0.03 %
< 0.03 %
15 Hz - 100 KHz
400
4 ohms minimum
116 dB
33 k ohms / 1.5 volt (unbalanced)
33 k ohms / 1.5 volt (balanced)
115 volts 60 Hz (U.S. version)
230 volts 50 Hz (European version)
800 watts
440 x 240 x 398 mm
17
34 kg, 75 lb.
®
x 9 x 15 inches
3/8 1/2 3/4
Serial. NO.
Begining 2341001
Y-316D-0209/pdf