Table of Contents
Advertisement
Position of jack support points
* NOTE Mercedes-AMG vehicles
Observe the notes in the Supplement.
#
You could otherwise fail to recognise
dangers.
& WARNING Risk of injury from incorrect
positioning of the jack
If you do not position the jack correctly at
the appropriate jacking point of the vehicle,
the jack could tip with the vehicle raised.
Only position the jack at the appropri‐
#
ate jacking point of the vehicle. The
base of the jack must be positioned
vertically under the jacking point of the
vehicle.
* NOTE Vehicle damage from the jack
If you do not position the jack correctly at
the appropriate jack support point of the
vehicle, the jack could tip over with the vehi‐
cle raised.
The jack is designed exclusively for
#
jacking up the vehicle at the jack sup‐
port points.
Internal use only
Wheels and tyres 421
Position support
2
of jack
#
port point 1.
Turn crank
3
clockwise until support
#
sits completely on jack support point
the base of the jack lies evenly on the
ground.
Turn crank
3
until the tyre is raised a maxi‐
#
mum of 3 cm from the ground.
Loosen and remove the wheel (
#
4
on jack sup‐
2
1
and
page 422).
/
Advertisement
Table of Contents
