Mercedes-Benz C-Class-Saloon 2020 Owner's Manual page 421

418 Wheels and tyres
Overview of the tyre-change tool kit
* NOTE Mercedes-AMG vehicles
Observe the notes in the Supplement.
#
You could otherwise fail to recognise
dangers.
* NOTE Plug-in hybrid
Observe the notes in the Supplement.
#
You could otherwise fail to recognise
dangers.
Apart from some country-specific variants, vehi‐
cles are not equipped with a tyre-change tool kit.
For more information on which tyre-changing
tools are required and approved for performing a
wheel change on your vehicle, consult a qualified
specialist workshop.
You require the following tools, for example, to
change a wheel:
Jack
R
Chock
R
Wheel wrench
R
Centring pin
R
% The jack weighs approximately 2.1 kg.
The maximum load capacity of the jack can
be found on the sticker affixed to the jack.
The jack is maintenance-free. If there is a
malfunction, please contact a qualified spe‐
cialist workshop.
The tyre-change tool kit is located under the
boot floor.
% Depending on the model, the tyre change
tool kit may be located at other positions
under the boot floor.
Internal use only
1 Wheel wrench
2 Folding chock
3 Jack
Preparing the vehicle for a wheel change
Requirements:
The required tyre-change tool kit is available.
R
If your vehicle is not equipped with the tyre-
change tool kit, consult a qualified specialist
workshop to find out about suitable tools.
The vehicle is not on a slope.
R
The vehicle is on solid, non-slippery and level
R
ground.