Table of Contents
Advertisement
Displays on the multifunction display
È (grey): variable limiter is selected but
R
not yet activated.
È (green): variable limiter is activated.
R
A stored speed appears along with the È dis‐
play. The segments in the speedometer light up,
up to the currently stored speed.
When the driving speed is greater than the
stored speed, the È display flashes.
Kickdown
If you depress the accelerator pedal beyond the
pressure point (kickdown), the variable limiter
switches to passive mode. The
message appears in the multifunction display.
After completion of kickdown, the variable lim‐
iter is activated again in the following situations:
If the vehicle speed drops below the stored
R
speed.
If the stored speed is called up.
R
If you store a new speed.
R
Operating cruise control or the variable lim‐
iter
& WARNING Risk of accident due to stored
speed
If you call up the stored speed and this is
lower than your current speed, the vehicle
decelerates.
Take into account the traffic situation
#
before calling up the stored speed.
Requirements:
Cruise control
Limiter passive
Cruise control is selected.
R
®
ESP
must be activated, but not intervening.
R
The vehicle speed is at least 20 km/h.
R
The transmission is in position h.
R
Variable limiter
The variable limiter is selected.
R
Internal use only
Driving and parking 195
To operate cruise control or the variable
#
limiter: press the rocker switch on the steer‐
ing wheel control unit up or down to the
desired position.
Switching between cruise control and the
variable limiter
To select cruise control: select h with
#
the right rocker switch.
Advertisement
Table of Contents
