Table of Contents
Advertisement
116 Seats and stowing
Fold the seat backrest
2
forwards.
#
If necessary, reset the driver's or front
#
passenger seat.
Folding back the rear seat backrest
* NOTE Damage caused by trapping the
seat belt when folding back the seat
backrest
The seat belt could become trapped and thus
be damaged when the seat backrest is folded
back.
Make sure that the seat belt is not trap‐
#
ped when folding back the seat back‐
rest.
Move the driver's or front passenger seat for‐
#
wards, if necessary.
Fold the corresponding seat backrest
#
back until it engages.
Left and right seat backrests: if the seat
backrest is not engaged and locked in place,
this will be shown on the multifunction dis‐
play on the instrument cluster.
A warning tone will also sound.
Internal use only
Centre seat backrest: if the seat backrest is
not engaged and locked in place, the red lock
verification indicator
Locking the release catch of the centre rear
seat backrest
Requirements:
The left and centre seat backrests are
R
engaged and joined together.
You can lock the centre seat backrest release
catch if you want to secure the boot against
unauthorised access. The centre seat backrest
can then be folded forwards only together with
the left seat backrest.
1
2
will be visible.
Advertisement
Table of Contents
