Canon VB-C500D Start Manual page 66

Canon security camera user manual

Hide thumbs Also See for VB-C500D:

Table of Contents

Step 4 Install the Camera

Tip

Image from the network is disconnected when you switch to the installation mode (when the

reset switch is pressed) or return to a normal mode from the installation mode.

In the installation mode, the camera cannot be controlled.

Only NTSC is supported for video output.

The LED remains lit in the installation mode, and a white square is shown on the bottom left

of the screen.

8. Install the inner cover and dome case.

Finally, place the inner cover and dome case, and tighten the two screws on the side face.

2-24

Table of Contents