Network Connection; Configure The Ethernet Connection - LINOVISION IOT-CPE5G Quick Start Manual

If you enter the username or password incorrectly more than 5 times, the login page will be
locked for 10 minutes.
E. After logging in the web GUI, you can view system information and perform configuration of the
device.

6. Network Connection

This section explains how to connect the device to network via WAN connection, Wi-Fi or cellular.

6.1 Configure the Ethernet Connection

A. Go to "Network"→ "Interface" → "Port" page to select connection type and configure WAN
parameters, then Click "Save & Apply".
13