Table of Contents
Advertisement
5. Login the Web GUI
IOT-CPE5G provides web-based configuration interface for management. If this is the first time you
configure the device, please use the default settings below:
Username: admin
Password: password
5.1 Wireless Access
A. Enable Wireless Network Connection on your computer and search for access point "Router_******"
to connect it.
B. Open a Web browser on your PC (Chrome is recommended) and type in the IP address 192.168.1.1
to access the web GUI.
C. Enter the username and password, click "Login".
If you enter the username or password incorrectly more than 5 times, the login page will be
locked for 10 minutes.
D. After logging in the web GUI, you can view system information and perform configuration of the
device.
11
Advertisement
Table of Contents
