Wired Access - LINOVISION IOT-CPE5G Quick Start Manual

5.2 Wired Access

Connect PC to IOT-CPE5G LAN port directly or through PoE injector. The following steps are
based on Windows 10 operating system for your reference.
A. Go to "Control Panel" → "Network and Internet" → "Network and Sharing Center", then click
"Ethernet" (It may have different names).
B. Go to "Properties" → "Internet Protocol Version 4(TCP/IPv4) ", select "Obtain an IP address
automatically" or "Use the following IP address", then assign a static IP manually within the same
subnet of the device.
C. Open a Web browser on your PC (Chrome is recommended) and type in the IP address 192.168.1.1
to access the web GUI.
D. Enter the username and password, click "Login".
12