Network Configuration - LINOVISION IOT-R32W Quick Start Manual

R32W Quick Start Guide

5. Network Configuration

This chapter explains how to connect R32W to network via WAN connection or
cellular.
5.1 Ethernet WAN Configuration
A. Go to "Network > Interface > Port" to change LAN1 to WAN port.
B. Go to "Network > Interface > WAN" to configure WAN parameters. Take static IP configuration as an
example. DHCP client and PPPoE type are optional according to your requirements.
Click "Save & Apply" button to make the changes take effect.
C. Connect WAN port to another router or modem.
D. Log in R32W web GUI via WAN port IP address and go to "Status > Network" to check if status is
"up".
www.linovision.com
12