6. Full Range Imager Current
Use the same measurement connection as described in "1. Run Mode Current
No.
Adjust the DC power supply so
that the DC voltmeter reads 3.9
V.
Select "[0].Current - Full Range
Imager" from All Test MENU-6
screen.
1
Operation
Display
– 47 –
DT-X200/DT-X8
.
"
Test Details
Check if the current value is within
420 to 520 mA.
If OK.
The screen returns to the Menu
screen.
If out of range (Failure):
An error indication is displayed.
-> Pressing the "Enter" key
returns you to the Menu
screen.