Casio DT-X200 Service Manual page 17

No. Name
1 Speaker
2 Indicator 1
3 Indicator 2
4 Screen
5 Cursor Key
6 Center Trigger Key
7 Power Key
8 R Key
9 L Key
10 Enter Key
11 Numeric Keys
12 Function Keys
13 Microphone
14 Fn Key
15 CLR Key
16 Strap Holes
17 microSD Card Slot
18 R Trigger Key
19 L Trigger Key
20 USB and Charging Unit
Mount Holes
21 Barcode Reader/
NFC Reader
22 Hand Belt Mount
23 Extension Port
24 Battery Pack Cover
Lock Switches
25 Mount Holes
26 Battery Pack Cover
27 Reset Switch
28 Power Supply/Data
Communication
Terminals
Generates audio and buzzer tones.
Orange: Charging
Green: Charging complete
Red: Battery pack error or the surrounding temperature is out of the charging
temperature range.
Flashes blue when operating via Bluetooth or orange when operating via W-LAN.
Lights red when there is a bar code scanning error and lights green when a bar
code scans successfully.
Lights red when the alarm function is activated.
Flashes magenta when the DT-X200 is ready to communicate.
The screen displays texts, operations, indicators and so forth.
Perform the same functions as the up, down, left and right arrow keys on a PC
keyboard.
Used to perform bar code reading. Can be assigned an arbitrary function.
Turns the power on and off .
Can be assigned an arbitrary function.
Can be assigned an arbitrary function.
Press when fi nishing entering numerical values or when moving to the next step.
Used to enter numeric values and decimal points.
F1: Similar function as the Alt key on a PC keyboard.
F2: Similar function as the Shift+Tab keys combination on a PC keyboard. Used to
move the cursor among entry or selection items.
F3: Similar function as the Tab key on a PC keyboard. Used to move the cursor
among entry or selection items.
F4: Not assigned.
F5: Enter a space.
F6: Similar function as the cursor left key on a PC keyboard.
F7: Similar function as the cursor right key on a PC keyboard.
F8: Select text entry mode.
(The mode changes in order of Numeric → Uppercase letter → Lowercase letter)
Used for audio input (including voice).
Used to make various settings in combination with the numeric
keys or when starting a pre-registered application.
Used to clear one letter to the left of the cursor.
Used to attach neck strap and hand belt.
microSD card slot.
Used to perform bar code reading.
Used to perform bar code reading.
Used to attach the USB and Charging Unit.
Laser light or LED light is emitted from this window that reads bar codes.
When using NFC, hold the card or tag up to the reader.
Used to attach the hand belt.
Provided for future extension.
Used to lock the battery cover and to release.
These holes hold the terminal seating in the optional USB Cradle or in the Ethernet
Cradle.
Used to cover the battery compartment that holds the battery pack inside.
Used to reset the Handheld Terminal.
Used to receive power provided by the USB Cradle, Ethernet Cradle or USB and
Charging Unit. Also used for data communication.
— 14 —
Description
DT-X200/DT-X8