3. Remove the screw S1 (1 pce) and then detach the NFC-ANTENNA.
Note: NFC-ANTENNA is fi xed with a double-face tape.
Screw S1
6-2. UPPER-CASE-UNIT
(1) Removing the UPPER-CASE-UNIT
1. Peel off the tapes (2 pcs.), unlock the connector locks, and then remove the FPCs (2 pcs.).
2. Disconnect the connector.
3. Remove the SCREW-PLATEs (2 pcs.).
Note: SCREW-PLATEs are fi xed with double-face tapes.
SCREW-PLATEs
Note on reassembling:
•
When the SCREW-PLATE is replaced with a new one, stick the P-SHEET.
Double-face Tape
NFC-ANTENNA
FPCs
P-SHEET
SCREW-PLATE
– 51 –
Connector
SCREW-PLATE
DT-X200/DT-X8
SCREW-PLATE