Hardware Test/Setting; General - Casio DT-X200 Service Manual

5. HARDWARE TEST/SETTING

5-1. General

In this chapter, how to check the hardware of DT-X200/DT-X8 is explained.
The general fl ow to start up the test program is as follows:
Obtain the test program Diag_dtx200-x8.zip
Unzip Diag_dtx200-x8.zip and copy it to a MicroSD card.
(For both test object DT-X200/DT-X8 and opponent DT-X200/DT-X8)
Copy the test program from the MicroSD card to the FlashDisk.
Delete the test program from the FlashDisk.
Prepare equipment required.
(Download from website.)
Install the MicroSD card.
Prepare equipment required.
Remove the MicroSD card.
Start the test program.
Perform Initial Settings
Perform function tests.
– 19 –
DT-X200/DT-X8
PC
DT-X200/DT-X8