Advertisement
Step 2
: Attach dowels (G) into partitions: left (9) and right (8) as shown.
: Attach hinge mounting plates (B) onto partitions: left (9) and right (8) using 2x varianta
cross head screws (C) as shown.
: Attach door stoppers ( J ) into both partitions: left (9) and right (8) using 1 x flat cross head
Fitting
screw (H) for each door stopper as shown.
G x 8
B x 2
C x 4
J x 6
H x 6
Step 3
: Attach bottom panel (4) to both partitions: left (9) and right (8) using 2x conformat hex head
screws (D) with hex key (N) for each partition as shown.
Fitting
D x 4
N x 1
9
J
8
B
Page : 5
Advertisement
