Page 1
John Lewis ELLIS SIDEBOARD Stock Number: 87702726 Thank you for purchasing this Ellis sideboard. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Pre-assembly preparation Please ensure instructions are read in full before attempting to assemble this product.
Page 3
Fittings and parts checklist Side panel - right Back panel - middle Drawer fronts Side panel - left Doors Drawer sides - right Top panel Partition panel - right Drawer sides - left Bottom panel Partition panel - left Drawer backs Removable shelfs Drawer bottoms Back panels - left &...
Page 4
Step By Step Assembly Instructions Step 1 : Attach minifix bolts (E) into side panels: left (2), right ( 1 ) and top panel (3) as shown. : Attach dowels (G) into side panels: left (2) and right ( 1 ) as shown. : Attach hinge mounting plates (B) onto side panels: left (2) and right ( 1 ) using 2x varianta cross head screws (C) as shown.
Page 5
Step 2 : Attach dowels (G) into partitions: left (9) and right (8) as shown. : Attach hinge mounting plates (B) onto partitions: left (9) and right (8) using 2x varianta cross head screws (C) as shown. : Attach door stoppers ( J ) into both partitions: left (9) and right (8) using 1 x flat cross head Fitting screw (H) for each door stopper as shown.
Page 6
Step 4 : Please note the proper locations of the hinge mounting plates (B) : Attach side panel - right ( 1 ) to one end of bottom panel (4) using 2x large minifix housings (F) with hex key (N) as shown. Fitting F x 2 N x 1...
Page 7
Step 6 : Caution: This product is heavy, with the help of an assistant stand the cabinet upright. : Attach top panel (3) onto the constructed cabinet structure using 8x large minifix housings (F) with hex key (N) as shown. Fitting F x 8 N x 1...
Page 8
Step 8 Step 1 Step 2 Step 9 1. Lateral adjustment as shown. 2. Front-to-back adjustment as shown. 3. Vertical adjustment as shown. Step 1 Lateral adjustment by screw adjustment. Step 2 Step 3 Vertical adjustment via slots on mounting plate by slackening and retightening the screws Front-to-back...
Page 9
Step 1 0 1 . Push to clip on hinge cover caps (P) as shown. 2. Attach handles (R) onto all doors (7) using 1 x metric cross head bolt (Q) for each door as shown. 3. Attach 1 2x wood shelf supports (K) into the predrilled holes inside the cabinet as shown. 4.
Page 10
Step 11 Assembly instructions for drawer box. For parts 11 , 1 2, 1 3, 1 4 and 1 5 . 1 . Attach 4x minifix bolts (S) into drawer fronts ( 11 ) 2. Attach drawer sides: left ( 1 3) and right ( 1 2) onto as shown.
Page 11
Step 1 2 : Attach handle (R) to the front of the drawer using metric cross head bolt (Q) as shown. : Insert the drawers into the cabinet. Fitting R x 3 Q x 3 Page : 11...
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE The construction of the product complies with BS 4875 PART 7: 2006 - LEVEL 3 BS EN 1 4749: 2005 John Lewis Partnership 171 Victoria Street, London, SWIE 5NN www.johnlewis.com Page : 1 2...