Summary of Contents for John Lewis EMPEROR CONSOLE TABLE MARBLE
Page 1
EMPEROR CONSOLE TABLE MARBLE Thank you for purchasing this PRODUCT. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Pre-assembly preparation Please ensure instructions are read in full before attempting to assemble this product...
Page 2
Fittings and parts checklist Item Description Legs Metal bar Top frame Item Description Flat washer Hexagon bolt Leveler Screw nut Allen key M4 Spanner...
Page 3
Step by step assembly instructions Step One Attach metal bar (3) to legs (2) on both side of the bar using 6 x washers (A) and bolts (B) by allen key (D) as supplied. We would advise that at this stage the top remains inside the original packaging to avoid scratching the top.
Page 4
Attach 4 x levelers (C) to assembly from step two then attach frame part to the table top using 4 x screw nuts (D) and spanner (F) supplied. IMPORTANT: Tighten by hand only, to avoid damage to the legs. ___________________________________________________________ Step Four Carefully stand console to upright position.
Page 5
IMPORTANT: Securing your furniture to the wall with this kit will prevent injury/property damage from unexpected tipping of furniture, particularly to avoid serious injury to children. IMPORTANT: The device must be fitted to this product in accordance with the following parts: 1 x plastic cable tie, 1 x plastic wall bracket.
Page 6
PLEASE NOTE WHEN LIFTING OR MOVING THE TABLE ALWAYS DO SO FROM THE UNDER FRAME AND NOT THE TABLE TOP Care and Maintenance How to care for your marble top The surface should be protected with coasters, trivets or placemats. All spills should be blotted up immediately, do not wipe the spill as this may make it spread.