Page 2
H-0000-S8125 #8 X 1-3/4" TORX SCREW H-0000-S8175 #8 X 2-1/2" TORX SCREW H-0000-S825 1/4"-10 X 3" LAG SCREW H-0000-S103 T20 & T25 TORX BIT H-0000-CTD 6-INCH T20 TORX BIT H-0000-T20X6 LEVELING MOUNT H-0000-LM Suggested Tools: Drill, Plastic Mallet PB-1606 Assembly...
Page 3
Insert the front and rear sling rails ) and the front bottom spreader ( ) into their respective slots. Then complete the process of seating the back slats into the frames so all tenons fully seated. PB-1606 Assembly...
Page 4
Be sure it is pushed against the back of the seat. Install (6) hardware to hold it in place. Insert the seat sling ( ) into the seat frame. It should drop into the frame with minor pressure applied to the frame sides. PB-1606 Assembly...